The introduction of Atlas Copco air oil separator filter:

The oil fine separator is a component that separates the screw lubricating oil from the compressed air. Under normal operation, the service life of the oil fine separator is about 3000 hours, but the quality of the lubricating oil and the filtering accuracy of the air have a huge impact on its life. It can be seen that the maintenance and replacement cycle of the air filter element must be shortened in the harsh environment, and even the installation of a front air filter is considered.

The oil fine separator must be replaced when it expires or the pressure difference between front and back exceeds 0.12Mpa. Otherwise, the motor will be overloaded and the oil separator will be damaged and run off.

The Replacement method of Atlas Copco air oil separator filter:
Remove the control pipe joints installed on the oil and gas barrel cover. Take out the oil return pipe extending into the oil and gas barrel from the lid of the oil and gas barrel, and remove the fastening bolts of the upper cover of the oil and gas barrel.
Remove the upper cover of the oil and gas barrel and take out the oil fine separator. Remove the asbestos pad and dirt stuck on the upper cover.
Install a new oil separator, pay attention to the upper and lower asbestos pads must be stapled and stapled, the asbestos pads must be placed neatly when pressing, otherwise it will cause the pads.
Reinstall the upper cover, oil return pipe, and control pipes as they are, and check for leaks.

Other models of Atlas copco air oil separator filter:

30HP              1622 0861 00

GA5FF            1622 0871 00

GA5/7/11C         1622 0245 00

GA5/7/11C         1513 0058 00

GA5/7/11C         1613 9014 00  

GA11/15/18/22      1612 3869 00 

GA11/15/18/22      1613 6921 00

GA11/15/18/22      1613 7502 00

GA11/15/18/22/30C  1622 0079 00 

GA11/15/18/22/30C  1622 0516 00

GA30/37/45         1613 2433 00

GA37+AD           1622 6460 00

GA37/45/55C        1613 8397 00

GA55/75            1613 7306 00

GA55/75/90C        1613 8007 00

GA90/110            2252 6313 00

GA90/110/132/160    1613 6423 00 

GA220/250/315       1614 7048 00

GA345               1614 5673 00

The company factory shot:

Company certification:

Packing &Shipping: