Atlas copco air oil separator filter element 1092300919
79.40 - 85.07 /Piece
Min.Order:1 Piece
XINXIANG Lefilter Filter CORP.LTD
Atlas oil/air separator product introduction
Atlas oil and gas separator is a key part of Atlas air compressor. Its performance will directly affect the effective power, fuel consumption and output airflow stability, cleanliness, and dryness of the compressor. High-quality oil separators, when installed and used correctly, can not only ensure the high quality of compressed air, but also ensure a considerable service life.
Commonly used Atlas oil and gas separator filter elements are divided into A. External type (spin-on like an oil filter) B. Built-in type (1. The flangeless type is divided into one end and two ends. There is a flanged sub-flange No holes, holes, gaps, etc.).
The compressed air from the Atlas air compressor entrains large and small oil droplets. The large oil droplets are easily separated by the Atlas oil and gas separator, while the small oil droplets (suspended oil particles) must pass through Atlas. The micron glass fiber filter layer of the oil and gas separator filters.
We use the most advanced anti-corrosion and high-efficiency microfiber agglomerated material as the filter body. The filter bed of the system filter element is composed of a pre-filter layer, a microfiber layer, a support layer, a filter layer and a gravity sedimentation layer to make the compressor output air The solid particles above 3μm in the middle can be filtered out, and the very small oil-water vapor dissolution of about 0.01-1μm is condensed into larger oil droplets when passing through the filter element, which accumulates at the bottom of the filter element, and then passes through the recess at the bottom of the filter element. The oil return pipe siphons and returns to the lubrication system so that the compressor discharges more pure, oil-free compressed air.
Atlas oil/air separator technical parameters:
1.filtration accuracy is 0.1μm
2.the oil content of compressed air can reach 3ppm or less
3.filtration efficiency 99.999%
4. the service life can reach 3000-6000h
5. Initial pressure difference: ≤0.02Mpa
6.The filter material is made of imported composite fiber
Atlas oil&gas separator regular model:
model | Original part number | Outer diameter(mm) | Height(mm) | The company's product number |
GA11/15/18/22 | 1612386900 | 220 | 250 | LF30313250 |
GA11/15/18/22 | 161375020 | 240 | 175 | LF30313175 |
GA30/37/45 | 1613243300 | 300 | 300 | LF30317300 |
GA37+ | 1622314000 | 300 | 250 | LF30717250 |
GA90/110 | 1614905400 | 596 | 280 | LF30335280 |
Other oil air separator models:
1622086100 1513005800 1613750200 1622314000 1613839702
1613984000 1622087100 1613901400 1622007900 1622646000
1613730600 1613955900 1622024500 1612386900 1622051600
1613688000 1622365600 2252631300 1622062301 1613692100
1613243300 1613839700 1613800700 1614905400 1621938499
1613642300 1621938600 1614952100 1604038201 1614567300
1621938400 1614905600 1614704800 1621907700 1622087100
1612386900 1613750200 1622007900 1622051600 1613243300
1613688000 1613839700 1613839702 1622569300 1613984001
1613955900 1621938599 1621938699 1604132880 2901101700
2906075300 29011011200 2911011500 2911011700 2906058800
2906020200 2906056500 2906009800 2906056400 2906002000
2901085800 2901077400 2901043200 2901007000 2901007800
2901077901 2901077900 2901000401 2901000300 2901052300
2901009902
Company profile:
Xinxiang Lifeierte Filter Corp.,Ltd (Stock code:837936)is specialized in manufacture of filters ,filter equipment,and environment system . Located in Xinxiang City-the center of Filtration in China.Lefilter has superior R & D team, professional technical team,experienced overseas sales team and perfect after-sales service system.We Lefilter people will try our best to satisfy customers' requirements.The develop philosophy of LEFILTER is "To purify environment,To serve society,To manage faithfully and To oyrsye excellence"!What's more,there're advanced production line,test machine and R & D department.They also obtained certification like ISO9001, IQNet & CQM,SGS,CNEX etc.
Company certification:
Factory shot:
Packing &Shipping:
FAQ
1.Are you a trading company or manufacturer?
A:Manufacturer with factory.
2.Do you Accept OEM service?
A:Yes! we can manufacture according to your requirement.
3.What´s your Delivery Time?
A:Normally within 1-7 working days after order confirmation.
4.How do you pack products?
A:Normally,plastic bag inside and carton outside .We´ll do according to customers´ requirement.