Intrinsically Safe module 701PGNKF of wireless transmitter

1. Install the HART device according to standard installation practices and the manufacturer’s instructions, being sure to use an approved thread sealant on all connections.

2. Unscrew the power module cover from the wireless device.

3. Connect the green power module to the wireless device. The green power module has a keyed connection to prevent improper connection. If the Green power module is placed into the housing the wrong way, it will not fit entirely into the housing.

Note

Wireless devices should be powered up in order of proximity from the Emerson Wireless Gateway, beginning with the closest device to the Gateway. This will result in a simpler and faster network installation.

4. Close the housing cover and tighten. Ensure the power module cover is fully tightened to prevent moisture ingress. The lip of the polymer power module cover should be in contact with the surface of the polymer enclosure to ensure a proper seal. Do not over tighten.

CMF025M319N2FZMZZZMC/2700R11BFZMZZZ

CMF300M372N2EZMZZZ/1700R12ABZMZZZPK

K200S418NZTI16ABPMZZZZ

K100S328NZTI16ABPMZZZZ

K050S113NZTI16ABPMZZZZ

K025S113NZTI16ABPMZZZZ

8800DF080SK1N1D1M5

8800DF010SK1N1D1M5

2051CFADG060CSHPS2T100031AA1QC1RLI3M 

Rosemount8800DW040SD1E1D1

Rosemount8800DF015SA1N1P1KBM5Q4PDYR

Rosemount8711ASA15FREMK3Q4/8712ESR2A2M4C1

Rosemount8800DR060SK1N2D1M5HR5 

8732EST2A1N0M4 

5700R12EEFAZZZFEEZZPO

CMF200H545N2EZEZZX  

1700R18ABPMZZZ