Cord anchorage pull testing machine/tension testing equipment /thrust testing apparatus for solar panel
Testing standard
It's conform IEC61215-2:2016 testing standard
Purpose
It’s to determine that the terminations, the attachment of the terminations, and the attachment of the cables to the body of the module will withstand stresses that are likely to be applied during normal assembly or handling operations, test in 4.14.2 (MQT14.1) and test in 4.14.3 (MQT 14.2) are to be performed .
The Main Technical Specifications
Drive ways | Use motor offer the drive power |
The mass of weights | 30N, 42N,55N,70N,80N,90N,100N,115N |
Pull cycle | 1s |
Times | 54 times (can set) |
Displacement | Manual measurement |
Electricity | 1 phase 220V 50HZ |
Testing Procedure
1. The unloaded cable shall be marked so that any displacement relative to the gland can be easily detected
2. The cable is pulled for duration of 1s, 50times, without jerks in the direction of the axis with the relevant force
3. At the end of the pull test, remove the force from the test mandrel, then measure the displacement of the cable at the outlet of the junction box
You May Like
- PV module Hail Pound testing machine/testing apparatus/testing equipment
- Environment Humidity freeze testing chamber/low temperature testing chamber for solar panel testing
- Solar panel hail impact machine/PV Module impigement testing machine/lash testing equipment with IEC61215-2:2016 standard
- Backboard resist scuffing testing equipment/Solar panel cut susceptibility testing machine/ solar panel testing machine
- PV Module Cables torsion testing equipment/twisting force testing machine/torque force testing apparatus
- PV Module withstand pressure ability testing machine / Solar panel deformation measurement testing equipment
- IEC 61730 standard Solar panel component rupture tester/Solar panel impact testing Machine/pv module testing machine
- solar panel Hail shock testing machine/ strike testing machine / impact testing equipment
- Mechanical testing machine cylinder pressure test equipment cylinder solar panel
- Solar panel simulte load testing machine / PV module panel pressure intensity testing equipement/Solar module testing equipment
Popular Searches
Find Similar Products By Category
You May Like
- 280~400nm wavelength Ultraviolet rays tester /UV testing chamber/ UV environment chamber for PV Module
- Hight quality solar panel conduit crook machine / conduit tube bending testing equipment/Solar panel testing machine
- solar panel deformation testing machine / Dynamic Mechanical laod tester / Static Mechanical load testing equipment
- PV Moule Solar panel testing machine /Solar panel static mechanical load tester with IEC61215-2:2016 testing standard
- solar panel PV module Ice ball withstand impact testing machine /Ice ball impact testing equipment/hail test
- Solar panel Constant speed impact testing machine /pv module hail impact testing
- solar panel compression strength testing machine / PV Module resistance deformation testing machine
- Solar panel Constant speed impact testing machine /Solar panel constant speed strike testing equipment/Hail test
- PV module surface abrasions detection testing machine/solar panel anti-damage testing equipment with IEC61730-2:2016
- High Quality Materials IEC 61215 Standard PV module Testing Machine UV Preconditioning Testing Machine
- 300 W solar panel surface Impact Tester with IEC61215-2:2016 testing standard / solar panel testing equipment
- PV solar panel 11 location hail impact strength testing machine system with IEC61215-2:2016 testing standard
- Cord Anchorage Pull Testing Equipment torsion testing machine
- Solar Panels Testing Hail Impact Testing Machine IEC61646 1703 IEC 61215 Standard
- PV module Humidity Freeze testing machine/Humidity chamber/PV Module testing machine with IEC61215-2:2016 testing