Hight quality solar panel conduit crook machine / conduit tube bending testing equipment/Solar panel testing machine 

Testing standard

It's conform IEC61730-2:2016 testing standard 

Purpose

The modules provided with junction boxes intended for attachment of a permanent wiring system using conduit must provide assurance of the ability of the box construction to withstand load forces which may be applied to the conduit during and after installtion

The Mainly Technical specifications

Testing procedure

1.Two 460mm lengths of proper trade size conduit with appropriate fitting for the box shall be assembled and installed onto the box on opposing surfafces. For boxes intended for use with non-metallic conduit, the conduit test lengths are to be to welded to the fittings and allowed to dry no less than 24h prior to assembly

2. The test assembly, with the box at the centre ,the supports are to be separated by a distance of 760mm plus the distance between the ends of the conduit in the box, to give the required bending moment on the sample under test

3.The load specified size of conduit , is to be suspended from the centre of the box for 60s, during this time, the box and the lengths of conduit shall be rotated through one complete revolution about the major axis of  the assembly.