IEC 61215 Wet Leakage Current Testing Machine / Testing PV Module Laboratory

HTPV-07

-----Wet Leakage Current Testing Machine

Standard:According to IEC61215 standard requirement

Purpose:

To evaluate the insulation of the module under wet operating conditions and Verify that moisture from rain,flog,dew or melted snow dose not enter the active parts of the module circuiry,where it might cause corrosion,a ground fault or a safety hazard.

Technical Specifications:

1.Test tank:Size:2100*1000*250mm(W*D*H),thickness 15mm,material:plexiglass

2.Temperature control:water constant temperature system researched and development by HOTOTECH,temperature:22±3℃

3.Liquid resistivity:less than 3500Ω•cm

4.Spray system:Nozzle adopt UL laboratory special nozzle,multi direction adjustment spray of the water pressure and flow amount can adjustable

5.Programmable insulation withstand voltage tester

5.1 Output voltage the maximum 0~5000V(adjustable)

5.2 Leakage current the maximum limit value:5mA

5.3 Output speed rate:500V/S

5.4 Insulation resistance test range:1MΩ~9999MΩ

5.5  Leakage current test range:0.001~5.000mA(DC)

6.Main Configuration

6.1 Insulation withstand Voltage Tester

6.2 Water constant temperature system(control box)

6.3 Spray frame

6.4 Insulation water tank

6.5 Conductivity meter

6.6 Sample frame