IEC60332 electrical single wire and cable vertical burning tester
USD $2,999 - $4,999 /Piece
Min.Order:1 Piece
Shenzhen Bonad Instrument Co., Ltd.
Standards:
•GB/T18380.(11-12)—2008---<Electronic cable and optical cable flame test under the flame conditions, single insulated wire and cable flame vertical spreading test>
•IEC60332—2004, instead of GB/T18380.1-2001
•GB/T5169.14-2007
Technical parameters:
outlooking | Stainless steel control cabinet, fume cupboard and metal cover is all-in-one type, which is easy to operate and good looking |
Metal cover: | 1200mm(H)×300mm(W)×450mm(D). The front is open, the top and bottom are sealed |
Blowtorch: nominal power: | 1kw |
Control mode: | When the set burning time reaches the preset time, the machine stops supplying the fire automatically |
Burning device: | automatic high pressure ignition |
flowmeter: | 1.5~15L/min, a gas flowmeter, 0.1~1L/min |
Flame detection device: | one imported thermocouple of diamter 0.5, K type, one electrolytic copper billet diamter 9mm, each one weight is 10g±0.05g, a suit of temperature and time display device |
The separately controlled exhaust fan is installed at the top |
Specifications:
Overall dimensions: | 600mm(W)×600mm(D)×2200mm(H) |
Power supply: | AC 220V, 50/60Hz, 2A |
Air source: | propane and air( prepared by users) |
Flame standard | IEC60695-11-2,1kw nominal pre-mixed flame |
Burner Tube | IEC60695-11-2 Figure A |
Burning Angle | 45° |
Thermocouple | Type K (Ni/Cr - Ni/Al),200°~1050° |
Thermocouple Size O/D | 0.5mm |
Temperature Resolution | 1ºC |
Standard Copper Block | weight 10 ± 0 .05 g before drilling. Cu-ETP |
Gas Supply | Propane,min.95% purity |
Input Power | 220 V 50 Hz 3A or 115 V 60HZ Optional |
Inner Dimensions | W*D*H=300mm*450mm*1200mm |
Conform to standard | IEC60332-1-1,IEC60332-1-2,IEC60695-11-2 |