Product Details

face mask melt-blown nonwoven Melt Flow Index MFI Testing Equipment

PP (polypropylene), a non-woven spray-melt cloth material in the mask, generally has a fluidity of 1000 ~ 2000g / 10min. It is a super-high-fluidity plastic. It cannot be tested at all by the melt index meter of the ordinary mass method, and we should A volumetric melt index instrument was used for testing.

Melt Flow Tester, Melting Point Apparatus

It is used to measure the temperature and load of various plastics and resins in the state of viscous flow, and the melt flow rate MFR value of the standard die every 10 minutes. It is suitable for polycarbonate, polyarylsulfone, and fluorine with a high melting temperature. Engineering plastics such as plastics and nylons are also suitable for polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyoxymethylene (POM), polycarbonate (PC) resins, etc. with low melting temperature The plastic testing is widely used in plastic production, plastic products, petrochemical and other industries as well as related institutions, scientific research units and commodity inspection departments.

Executive standard

GB / T3682-2018.1 Determination of melt flow rate (MFR) and melt volume flow rate (MVR) of plastic thermoplastics. Part 1: Standard method GBT3682.2-2018 Thermoplastic melt flow rate (MFR) and melt volume flow rate ISO 1133: 2011 Determination of melt flow rate MFR and melt volume flow rate MVR of thermoplastic plastics ASTM D1238 Extrusion Plastometer Standard Test Method for Determining the Melt Flow Rate of Thermoplastic Plastics

The Main Parameters: 1. Equipment model: HE-FV-400P 2. Temperature range: 40 ℃ ～ 450 ℃ 3. Temperature drift: 4 hours ≤0.5 ℃ 4. Temperature fluctuation: ± 0.2 ℃ 5. Temperature uniformity of 10mm ～ 70mm above the die: ± 1 ℃ 6. Temperature display resolution: 0.1 ℃ 7. Time display resolution: 0.1S 8. Cutting material timing range: 1 ～ 999S adjustable 9. Die diameter: Φ2.095 ± 0.005mm (half die 1.05mm + 0.005) 10. Outlet length: 8.000 ± 0.025mm 11. Piston rod diameter: 9.474 ± 0.007mm 12. Piston rod length: 6.35 ± 0.13mm 13. Loading barrel diameter: Φ9.550 ± 0.007mm 14. Test range: 0.1 ～ 150g / 10min 15. Weight accuracy: ± 0.5% 16. Displacement measurement accuracy: 0.01mm 17. Timing accuracy of volume method: 0.001S 18. Displacement measurement encoder: Omron photoelectric rotary encoder 19. Test method: mass method + volume method 20. Test range of quality method: 0.1-150g / 10min 21. Volume method test range: 50-5000cm3 / 10min (up to 5000 cm3 / 10min can be measured by means of plugging die) 22. Controller: 7 inch touch screen controller 23. Output mode: micro automatic printout 24. Cutting method: manual and automatic cutting 25. Test load: 8 levels in total, 8 sets of weights Power supply voltage: AC220V ± 10% 50HZ

Title goes here.

Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.