High and low temperature mouse wheel life test box

This machine is suitable for life test of various rollers, can set speed, can be set times, beautiful appearance and easy operation

1. Test station: 1

2. The fixture for installing the sample can be adjusted, disassembled and replaced. At the same time, the upper, lower, left and right and front and rear (0~10cm) positions of the clamp can be adjusted. The clamping width of the clamp can be adjusted from 0 to 10cm.

3, the scrolling angle and speed of the roller can be controlled, the angle range is: 0~360°, the scrolling speed adjustment range is: 1~360°/s, the precision is 10%, and the rolling can be realized before and after;

4. The part in contact with the controller roller can be replaced and soft contacted, and spare parts are replaced;

5, can control the displacement of the roller, the control range is 0~10mm (adjusted on the inner wall of the thermostat), the precision is 10%, adding coarse adjustment and fine adjustment, adding reset and zero return function;

6. Increase the protection function to prevent the sample from being damaged when twisted to the head;

7. In addition to installing the panel for controlling the temperature of the thermostat, the device also needs to add a panel to control the rolling angle and speed. It is necessary to reserve a control interface (Model Bus control) and provide a communication protocol for subsequent control by ourselves;

8.Remarks: Since the rotation of the roller is controlled by rolling friction, there is no card position. Different rolling friction pressures may affect the rotation angle of the roller, so the rotation angle may be deviated and an accurate deviation angle range may not be given. Please note 8. The wheel can be set to multi-turn forward and reverse, and the number of positive and negative turns can be set differently. After setting, repeat cycle test can be done. Test angle: adjustable from 0-360 degrees 

Testable product size: 150X100X80mm