Sauer danfoss Hydraulic piston Pump H1P045 H1P H1 H1P045LAA3C2ND8FG5H2L25L25BP24
FRR090C FRL074B FRL090C FRL Sauer FRR Pump. FRR074 FRR090 FRL074 FRL090 future below:
variable displacement, axial piston pumps for open circuit applications. Each frame within the Series 45 family is uniquely
designed to optimize performance, size, and cost, matching the work function requirements of the demanding mobile equipment
marketplace.
Details regarding the choice of hydraulic fluid:
The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in a
closed circuit the circuit temperature.
The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum
range (νopt)
- the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case.
Example: At an ambient temperature of X °C an operating temperature of 60 °C is set. In the optimum operating viscosity range
(νopt; shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68. Please note: The case drain
temperature, which is affected by pressure and speed, is always higher than the circuit temperature.
At no point in the system may the temperature be higher than 115 °C. If the above conditions cannot be maintained due to extreme
operating parameters, please consult us.
Hydraulic fluid; Before starting project planning, please refer to our data sheets RE 90220 (mineral oil), RE 90221
(environmentally acceptable hydraulic fluids) and RE 90223 (HF hydraulic fluids) for detailed information regarding the choice of
hydraulic fluid and application conditions. The variable pump A4VG is unsuitable for operation with HFA, HFB and HFC. If HFD or
environmentally acceptable hydraulic fluids are being used, the limitations regarding technical data and seals mentioned in RE
90221 and RE 90223 must be observed. When ordering, please indicate the used hydraulic fluid.
variable displacement, axial piston pumps for open circuit applications. Each frame within the Series 45 family is uniquely
designed to optimize performance, size, and cost, matching the work function requirements of the demanding mobile equipment
marketplace.
Details regarding the choice of hydraulic fluid:
The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in a
closed circuit the circuit temperature.
The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum
range (νopt)
- the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case.
Example: At an ambient temperature of X °C an operating temperature of 60 °C is set. In the optimum operating viscosity range
(νopt; shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68. Please note: The case drain
temperature, which is affected by pressure and speed, is always higher than the circuit temperature.
At no point in the system may the temperature be higher than 115 °C. If the above conditions cannot be maintained due to extreme
operating parameters, please consult us.
Hydraulic fluid; Before starting project planning, please refer to our data sheets RE 90220 (mineral oil), RE 90221
(environmentally acceptable hydraulic fluids) and RE 90223 (HF hydraulic fluids) for detailed information regarding the choice of
hydraulic fluid and application conditions. The variable pump A4VG is unsuitable for operation with HFA, HFB and HFC. If HFD or
environmentally acceptable hydraulic fluids are being used, the limitations regarding technical data and seals mentioned in RE
90221 and RE 90223 must be observed. When ordering, please indicate the used hydraulic fluid.
Charge pump | Hydraulic pump parts | |
Hydraulic pump | Cylinder block | Press pin |
Piston motor | Piston shoe | Snap ring |
Piston pump | Retainer plate | Coil spring |
Gear pump | Ball guide | Disk spring |
Charge pump | Valve plate | Barrel washer |
Pilot pump | Shoe plate | Oil seal |
Vane pump | Bearing plate | Frication plate |
Repair OEM parts | Swash plate | Steel plate |
Motor spare parts | Drive shaft | Metal |
1.Be of long standing factory built in 1986
2.USA professional engineer and with 5 utility models and 5 patents
3.GRH OEM and with 370 professional employees, 4 work shops total 22000 square meters
4.208 pcs machanical and test equipments
5.100% factory testing and inspection personnel in accordance with international standards for the high-frequency sampling,to
ensure the quality of products manufactured
6.become TEREX,JOHN DEERE, HYDAC,AGCO,EATON ,NEW HOLLAND ,GARONER DENVER and MAHINDRA supplier
2.USA professional engineer and with 5 utility models and 5 patents
3.GRH OEM and with 370 professional employees, 4 work shops total 22000 square meters
4.208 pcs machanical and test equipments
5.100% factory testing and inspection personnel in accordance with international standards for the high-frequency sampling,to
ensure the quality of products manufactured
6.become TEREX,JOHN DEERE, HYDAC,AGCO,EATON ,NEW HOLLAND ,GARONER DENVER and MAHINDRA supplier
You May Like
- Sauer danfoss Hydraulic piston Pump 51D080 51D 51D080-1-RD3NE2B1NNU1NNN040AAE60000
- Sauer danfoss Hydraulic piston Pump 51D080 51D 51C080-1-RD3NE2B1NNU1ACB045AAF00000
- Sauer danfoss Hydraulic piston Pump 51D060 51D 51C060-1-HD1NB1B3NNU3ABA032AAE60000
- Sauer danfoss Hydraulic piston Pump 51D060 51D 51C060-1-RD1NE2B1NNU1ACB036AAE60000
- Sauer danfoss Hydraulic piston Pump 51D160 51D 51C060-1-RD1NE2B1NNU1NN036AAE60000
- Sauer danfoss Hydraulic piston Pump 51D110 51D 51C110-1-RD3N-E2B1NNU1
- Sauer danfoss Hydraulic piston Pump 51D110 51D 51D110-1-RD4NE2B1NNU1NN
- Genuine Italy ATOS RZMA series Proportional valve RZMA-A-010/180/M 24/BT proportional Relief valve
- Trade assurance SQP series Tokimec double vane pump SQP3-38A-18-18 SQP21-21-11-1DC SQP32-25-17 SQP43-60-38-86CC
- Trade assurance Vickers 2520V 3520V 3525V 4520V 4525V 4535V Hydraulic Vane Pump 2520V-21A2
Popular Searches
Hydraulic Motor
power unit
concrete mixer motor
piston motor
hydraulic power unit
Hydraulic Piston Motor
Radial Piston Hydraulic Motor
Hydraulic Orbit Motor
Hydraulic Orbital Motor
Hydraulic Pump Motor
Hydraulic Wheel Motor
Rexroth Hydraulic Motor
Hydraulic Gear Motor
Pump Unit
hydraulic unit
high power hydraulic motor
Find Similar Products By Category
You May Like
- Trade assurance YUKEN PVR50 PVR150 Hydraulic Vane Pump PV2R150-F-F-170 PVR150-F-F-140-RAA-3480
- TOKIMEC Original stock SQP21-21-11-1DC-18-1 Variable vane pump
- Sauer Danfoss MCV116 series MCV116A1402 MCV116A1407 MCV116A1501 Hydraulic control valve
- Sauer Danfoss MCV116 series MCV116A1301 MCV116A1307 MCV116A1401 Hydraulic control valve
- Sauer Danfoss MCV116 series MCV116A1201 MCV116A1203 MCV116A1204 Hydraulic control valve
- Sauer Danfoss MCV116 series MCV116A1100 MCV116A1101 MCV116A1102 Hydraulic control valve
- Trade assurance PV7-1X/2X 10 16 20 40 63 100 size Rexroth vane pump PV7-17/16-20RE01MC3-16
- Trade assurance Tokimec DG5V-7,DG5S-H8,DG5S4-10 directional valve,hydraulic valves DG5V-7-3C-7-T-P7-H-80-JA
- KCL Fixed capacity high and low pressure vane pump 50T-07,50T-12,50T-14,50T-17,50T-20,50T-23,50T-26,50T-30,50T-36,50T-39,50T-43
- JAPAN TOKYO KEIKI TOKIMEC double vane pump SQP43-60-38-86BB-18 injection molding machine hydraulic pump SQP43-60-38-86CC-18
- Trade assurance FURNAN VHID-F-3030 VHID-F-4040 VHP-F-30 VHP-F-40 VHPD-F-3030 VHPD-F-4040 hydraulic vane oil pump
- Trade assurance Tokimec SQP32-25-17 double vane pump SQP21 SQP31 SQP32 SQP41 SQP42 SQP43
- Trade assurance FURNAN VHI-F-30 VHI-F-40 AHPF-30 AHPF-40 VHO/F/15 VHO/F/20 VHO-F-08 hydraulic vane oil pump
- Parker hydraulic variable displacement vane pump PVS series of PVS08,PVS12,PVS16,PVS25,PVS32,PVS40,PVS50 PVS40EH140C2
- Italian original ATOS PFE series hydraulic vane pump PFE-31022/1DU PFE-41 PFE-51