Causes and treatment of abnormal phenomena in oil pressure system

The causes and treatment of abnormal phenomena in the oil pressure system should be understood from three aspects shared by Aluminum CNC Machining Service China.

(1) pump injection not the main reason may be the tank liquid level is low, oil pump reversal, low speed, high oil viscosity, the oil temperature is low, and blockage of the filter, vacuum tubing pipe volume is too large, the inlet of air, shaft and rotor frayed, etc., has corresponding solutions to the main reason, the wound with oil, confirm sign, when oil pump reverse change to come over, etc.

(2) abnormal pressure means that the pressure is too high or too low. The main reasons are various, such as improper pressure setting, bad pressure regulating valve coil action, abnormal pressure gauge, oil pressure system leakage. The corresponding solution is to disassemble and clean according to the specified pressure setting, replace a normal pressure gauge, and inspect each system in turn.

(3) noises are mainly caused by oil pumps and valves. When the valve is noisy, the reason is that the flow exceeds the rated standard, the flow should be adjusted appropriately; When there is noise in the oil pump, the reasons and corresponding solutions are also various, such as high viscosity of oil, low oil temperature, the solution is rising oil temperature; When there are bubbles in the oil, air should be released from the system and so on.
That’s all for today’s sharing,and we also supply High Precision Cut Machine Parts,if you have any demand for our products,just feel free to contact us.

Shanghai Elue supply plastic molding, CNC machined prototypes, plastic molded electronic parts, auto parts injection. In my company, we believe "Quality is the Culture", and customer satisfaction is the most important. Thanks for your time reading and you are welcome to quote here!

For more information about China high precision plastic mold, please click here to visit.

/