Work Principle

 The shape of the parking system is cylinder or multi prism. The structure can be divided into inner cylinder and outer cylinder. The inner cylinder is the lifting channel which consists of lifter, turntable, layer levelness system and carrier. The outer cylinder is the parking area which is under radiate arrangement. 6-12 car spaces can be set at each floor.

This circular lift full automatic smart parking system can be full underground design, also can be full on the ground design.

Characteristics

1) Scope of application: Outdoor multi-level parking system and indoor concrete type well type parking system.

2) Drive mode: Hydraulic pulley driven by large drive ratio. The hydraulic system adopts pump group pumping station. Every pump can become the backup of other pumps. It is low noise, high working and safety.

3) Car exchanging: comb type carrier or tire gripping carrier.

4) Layouts: ground layout, half ground half under underground layout and underground layout.

5) Entrance observation mirror, voice prompts, LED display are equipped.

Technical Parameters

Drive mode	hydraulic & wire rope
Car size（L×W×H）	≤5.3m×1.9m×1.55m
	≤5.3m×1.9m×2.05m
Car weight	≤2350kg
Motor power & speed	Lift	30kw Max 45m/min
	Turn	2.2kw 3.0rpm
	Carry	1.5kw 40m/min
Operation mode	IC card/ key board/ manual
Access mode	Forward in, forward out
Power supply	3 phase 5 wires 380V 50Hz

 

Full Underground Circular Parking System		Full on the ground Circular Parking System