Green Emerson Smart Power 701PGNKF

Power Module Life Up to 10 years at a 1 minute update rate

Certifications/Approvals Intrinsically Safe (ATEX, IECEx, US, Canada, EAC)

Compatible Devices ? Rosemount? 708 Wireless Acoustic Transmitter

 Rosemount 3051 Wireless Pressure Transmitter

 Rosemount 2051 Wireless Pressure Transmitter

 Rosemount 248 Wireless Temperature Transmitter (Polymer)

With up to 10-year, maintenance-free operation, the Emerson 701P SmartPower? Module - Green provides replacement without transmitter removal allowing you to quickly change power modules in the field. As an intrinsically safe solution, this power module is engineered with a robust and adaptable design that withstands harsh environments and allows you to choose the best mode of power for your application.

Features

Up to 10-year, maintenance-free operation and replacement without transmitter removal for reliable performance

Intrinsically safe device designed for routine maintenance in hazardous areas

Adaptable module offers a selection of power modes to meet varying application demands

Low level alerts allow easy maintenance and replacement planning

Keyed connections provide easy and fail-safe replacements

1. Install the HART device according to standard installation practices and the manufacturer’s instructions, being sure to use an approved thread sealant on all connections.

2. Unscrew the power module cover from the wireless device.

3. Connect the green power module to the wireless device. The green power module has a keyed connection to prevent improper connection. If the Green power module is placed into the housing the wrong way, it will not fit entirely into the housing.

Note

Wireless devices should be powered up in order of proximity from the Emerson Wireless Gateway, beginning with the closest device to the Gateway. This will result in a simpler and faster network installation.

4. Close the housing cover and tighten. Ensure the power module cover is fully tightened to prevent moisture ingress. The lip of the polymer power module cover should be in contact with the surface of the polymer enclosure to ensure a proper seal. Do not over tighten.