EMERSON types EX7-I21,EX8-M21 and EX8-I21 Electrical Control Valves
CNY 2888 - 3888 /Unit
Min.Order:1 Unit
Guangxi COHO Electromechanical Co. Ltd..
EMERSON types EX7-I21,EX8-M21 and EX8-I21 Electrical Control Valves Technical Data
Compatibility * HCFCs, HFCs, CO 2
Mineral and POE lubricants
MOPD (maximum operating EX4/EX5/EX6/EX7: 35 bar
pressure differential) EX8: 30 bar
Max. working pressure, PS 45 bar
Medium temperature range: Liquid inlet temperature
Uniflow version TS: -50 ... +100°C
Biflow version TS: -40 ... +80°C
Ambient temperature -40 ... +55°C
Storage temperature -40 ... +70°C
CE marking EX4/EX5 not required
EX6/EX7/EX8 required, Cat I, Module A
Salt spray test non-corrosion stainless steel body
Humidity 5 … 95% R.H.
*) Valves are not released for use with inflammable refrigerants.
Connections ODF stainless steel fittings
Protection accordance to IP 67 with Alco supplied
IEC 529, DIN 40050 cable connector assembly
Vibration for non-connec- 4 g
ted and fastened valve (0 .. 1000 Hz, 1 Oktave /min.)
Shock 20g at 11 ms, 80g at 1 ms
Net weight 0.5 kg (EX4), 0.52 kg (EX5), 0.6 kg (EX6),
1.1 kg (EX7), 1.5 kg (EX8)
Full travel time EX4/EX5/EX6: 1.5 s
EX7: 3.2 s, EX8: 5.2 s
Seat leakage Positive shut-off better than solenoid valve
External leakage ≤ 3 g / Jahr
Package and delivery Single pack,
without electrical connector
EMERSON types EX7-I21,EX8-M21 and EX8-I21 Electrical Control Valves Selection Chart
Type Part No. Flow Pattern Capacity range Inlet connection Outlet connection Electrical connection
EX4-I21 800 615
3/8“ ODF 5/8“ ODF
EX4-M21 800 616 10mm ODF 16mm ODF
EX5-U21 800 618 5/8“ (16mm) ODF 7/8“ (22mm) ODF
EX6-I21 800 620 7/8“ ODF 1-1/8“ ODF
EX6-M21 800 621 Uni-flow 22mm ODF 28 mm ODF
EX7-I21 800 624 1-1/8“ ODF 1-3/8“ ODF
EX7-M21 800 625 10 ... 100% 28mm ODF 35mm ODF
M12 Plug
EX8-M21 800 629
42mm ODF 42mm ODF
EX8-U21 800 630 1-3/8“ (35mm) ODF 1-3/8“ (35mm) ODF
EX8-I21 800 631 1-5/8” ODF 1-5/8” ODF
EX4-U31 800 617 5/8“ (16mm) ODF 5/8“ (16mm) ODF
EX5-U31 800 619 Bi-flow 5/8“ (16mm) ODF 7/8“ (22mm) ODF
EX6-I31 800 622 (Heat Pump) 1-1/8“ ODF 1-1/8“ ODF
EX6-M31 800 623 28mm ODF 28mm ODF
EX7-U31 800 626 1-3/8“ (35mm) ODF 1-3/8“ (35mm) ODF
EMERSON types EX7-I21,EX8-M21 and EX8-I21 Electrical Control Valves Features
• Multifunction as expansion valve, hot gas bypass,
suction gas throttling, head pressure, liquid level
actuator etc
• Fully hermetic design (no thread joints between
valve body and motor compartment)
• Applicable to all common refrigerants (HCFC,
HFC) and for subcritical CO 2 applications
• Stepper motor driven
• Short opening and closing time
• Very fast full stroke time
• High resolution and excellent repeatability
• Positive shut-off function to eliminate use of
additional solenoid valve
• Bi-flow versions for heat pump applications
• High linear flow capacity
• Extremely wide capacity range (10 … 100%)
• Continuous modulation of mass flow, no stress
(liquid hammering) in the refrigeration circuit
• Direct coupling of motor and valve for high
reliability (no gear mechanism)
• Ceramic slide and port for highly accurate flow
and minimal wear
• Europe patent No. 0743476, USA patent
No. 5735501, Japan patent No. 28225789
• Balanced force design
• Corrosion resistant stainless steel body and
stainless steel connections
• PS: 45 bar
• Liquid Inlet Temperature TS:
Uniflow: -50 to +100°C, Biflow: -40 to +80°C
EMERSON types EX7-I21,EX8-M21 and EX8-I21 Electrical Control Valves photos