*Specification
AWS/ASME Spec 5.14
AWS Class ERNiCrMo-13
UNS N06059
*Chemical Composition,%
C | Mn | Si | Cr | Mo | S | P | Ni | Fe | Cu | Co | Al |
≤0.01 | ≤0.5 | ≤0.1 | 22-24 | 15-16.5 | ≤0.01 | ≤0.015 | Rest | ≤1.5 | ≤0.5 | ≤0.3 | 0.1-0.4 |
*Typical Welding Parameter & Mechanical Property
Diameter | Process | Volt | Amps | Shielding Gas | |
In | mm | ||||
0.035 | 0.9 | GMAW | 26-29 | 150-190 | Spray Transfer 100% Argon |
0.045 | 1.2 | GMAW | 28-32 | 180-220 | |
1/16 | 1.6 | GMAW | 29-33 | 200-250 | |
1/16 | 1.6 | GTAW | 14-18 | 90-130 | 100% Argon |
3/32 | 2.4 | GTAW | 15-20 | 120-175 | 100% Argon |
1/8 | 3.2 | GTAW | 15-20 | 150-220 | 100% Argon |
Tensile Strength MPa(ksi) | Yield Strength MPa(ksi) | Elongation % | |
AWS requirement | 760(110) | Not specified | Not specified |
Typical results as welded | 700(102) | 400(58) | 30 |
*Feature
Nickel-chromium-molybdenum alloy with an extra low carbon and silicon content.
Excellent corrosion resistance and high mechanical strength.
Some typical base metals that this alloy is used on are ASTM and ASME B and SB 574, 575, 619, 622 and 626.
*Application
Used to weld alloys of similar composition as well as dissimilar joints between nickel-chromium-molybdenum alloys and stainless or carbon or low alloy steels.
For cladding overlay as well as thermal spray applications.
