*Similar Grade
GB | Trademark | UNS | DIN EN/DIN | W-Nr. | NF | ГОСТ | BS EN/BS |
GH3030 | Nimonic 75 | N06075 | NiCr20Ti | 2.4951 | NC20T | ХН78Т ЭИ435 | NiCr20Ti HR 5 |
*Product Forms
Pipe, Tube, Sheet, Strip, Plate, Round Bar, Flat Bar, Forgings, Hexagon, Wire
*Brief
Alloy 75 (UNS N06075, Nimonic 75) is a 80/20 nickel-chromium alloy with controlled additions of titanium and carbon. Nimonic 75 has good mechanical properties and oxidation resistance at high temperatures. Alloy 75 is most commonly used for sheet metal fabrications which require oxidation and scaling resistance together with medium strength at high operating temperatures. Alloy 75 (Nimonic 75) is also used in gas turbine engines, for components of industrial furnaces, for heat treating equipment and fixtures, and in nuclear engineering.
*Chemical Composition,%
% | Ni | Cr | Fe | C | Mn | Si | P | S | Cu | Ti |
Min | Rest | 18.0 | 0.08 | 0.20 | ||||||
Max | 21.0 | 5.00 | 0.15 | 1.00 | 1.00 | 0.02 | 0.01 | 0.50 | 0.60 |
*Typical Physical & Mechanical Property(Annealed)
Density | Melting point | Tensile strength, MPa | Yield strength, MPa | Elongation,% |
8.37 g/cm3 | 1340-1380℃ | 780 | 550 | 40 |
*Specification
Rod, Bar, Wire, Forgings | BS HR5, DIN 17752/17753, ISO 9723/9724 |
Plate, Sheet, Strip | BS HR 203, DIN 17750, ISO 6208 |
Pipe, Tube | BS HR 403, DIN 17751, ISO 6207 |
Others | ASTM B366/ASME SB366(Fittings), DIN 17744 |
*Feature
These alloys are characterised by their high-temperature low-creep and high performance. Additives like titanium and aluminium are used for enhancing the strength of the alloy. Nimonic 75 is readily fabricated and welded. Nimonic 75 alloy exhibits good corrosion resistance, mechanical properties and heat resistance.
*Application
1. Gas turbine engines
2. Ccomponents of industrial furnaces
3. Heat treating equipment and fixtures
4. Nuclear engineering.