Product Details

RY high temperature hot oil centrifugal circulating pump

1. RY high temperature oil pump single stage hot oil transfer centrifugal pump is a kind of centrifugal pump, suitable for heat-conduction oil, or other high temperature oil transfer with temperature≤370°C.

2.Pump can be equipped with explosion proof motor, gear box motor, also can be equipped with diesel engine.

3. It is sealed with new dynamic high temperature oil seal, or high temperature mechanical seal without leakage. And casing is made of high quality cast steel alloy.

4. Simple and reasonable structure gets low operating cost, high efficiency, small volume, low noise and excellent performance in thermal system application.

5. The centrifugal pump works as a hot oil (thermal oil) system booster pump for boiler, bitumen, resin, spinning and printing, dyeing, plastic and rubber processing, foodstuff industry, etc.

MODEL	FLOW	HEAD	SPEED	POWER(KW)		EFFICIENCY	NPSH
MODEL	m3/h	m	r/min	SHAFT	MOTOR	%	m
125-80-270	75	20	1460	6.7	7.5	63	1.8
150-125-260	150	16	1460	8.5	11	75	1.8
150-125-320	100	30	1460	8.5	11	70	1.3
150-125-270	160	18	1460	11	15	75.5	2
150-125-360	120	36	1460	11.7	15	73	1.5
150-125-380	125	45	1460	15	18.5	72	1.3
150-125-280	180	20	1460	15	18.5	75.5	2.3
150-125-395	130	50	1460	19	22	73	1.9
150-125-350	140	40	1460	19	22	73	1.8
150-125-320	200	32	1470	26	30	76	2.2
150-125-380	160	45	1470	26	30	73	1.9
150-125-400	180	50	1480	31	37	74	1.8
200-150-400	260	50	1480	38	45	75	2.6
200-150-430	240	60	1480	38	45	73.5	2.3
200-150-410	300	50	1480	45.5	55	78	2.8
200-150-435	280	60	1480	46	55	75	2.6
200-150-420	400	50	1480	62	75	79	3.6
200-150-440	380	60	1480	62.5	75	77.5	3.5
200-150-465	300	70	1480	63	75	75	3.6
200-150-415	450	50	1480	75	90	80.5	4.2
200-150-450	420	60	1480	76	90	79.5	3.6
200-150-470	350	70	1480	77	90	76	3.1
250-200-460	460	60	1480	92	110	79.8	4
250-200-475	430	70	1480	94	110	78.5	3.6
250-200-470	560	60	1480	112	132	81	4.6
250-200-480	500	70	1480	113	132	80	4.5
300-250-500	600	72	1480	142	160	80.2	9.6