performance

Lighting incubator transfers actual temperature detected from temperature sensor into signal, Through microcomputer control to heater towards required temperature  

technical parameters

1. volume：250L, 300L, 400L;

2. Temp range ：0～65C;(with lighting10～50C、without lighting5～50C );

3. Temp fluctuation range ：±0.5C(10C～40C);

4. Temp uniform range ：±1C(10C～40C );

5. Lighting ：15000IX;

6. Power voltage ： 220V/50Hz;

7. Input power：1350W(250L) ; 1350W(300L) 1550W(400L);

8. Working ambient ：ambient temp 10~30C   relative humidity70% below ;

9. refrigeration：R134;

10. Equipment class：class I

Notice ：this equipment has low temperature auto-defrost function, it is normal if there is fluctuation when low temperature auto-defrost 

Pre-operation preparation

Before starting the device for the first time, please follow the following procedures:

1. Open the outer door and the glass inner door, and take out the shelves and accessories inside the equipment.

2. Wipe the inner wall of the box with gauze soaked in alcohol for disinfection, and then wipe the alcohol with dry gauze.

3. The shelf shall be placed into the shelf groove of the equipment after the shelf is placed in the height and height position according to the requirements of the experiment.

4. Before use, a short pipe with overflow shall be inserted into the overflow pipe of the box body, and a water disc shall be placed under the outlet of the overflow pipe for use (refer to the component diagram).

Complaint:service@kentonchina.com

E-mail : kenton@kentonchina.com

Lighting incubator：

/light-chamber/20170527/10.html