Laboratory IAQ Air Cleaner Solution Test Lab Air Handling Unit HVAC
USD $2,000 - $2,000
Min.Order:1
Hodream Environment Equipment Co., Ltd.
• Removal and filter off PM2.5 and VOC (Volatile Organic Compound) for office room or laboratory application
• Supply precise Temperature and humidity clean air
• Different types filter installed to adsorb moisture, PM2.5 and VOCs, filter toxins and remove odors
• All in one compact system design, could be shipped in sections or knock down form
• Top Air intake and Top Discharge (for duct connection or free blow)
• Plug and play concept for simple easy installation and commissioning
• Serviceable Energy Saving EC Fan
• Operation efficiency and energy saving
• Outstanding reliability and performance
• Configured flexibly, numerous options for customization
• HVACR and Industrial Clean Air application
Two Sections Work Together With Humidifier & Zeolite Filter Inside Packaged and Compact
Devided into two sections Equiped humidifier to control the humidity Direct expansion refrigerating system
can be put into lift Equiped Zeolite filter to absorb VOCs Compressor built inside, slim & compact
• Penta-post extra heavy gauge aluminium profiles and strong fiber-reinforced PE corner connection forming the structural frame
• superior mechanical strength and rigidity to the unit frame and to prevent any buckling or deformation
• Thermal bridge free design, the profiles filled with polyurethane foam for insulation
• Anodizing surface treatment for profiles, corrosion-resistant
• Stainless steel frame available
• Double skin construction is provided by sandwich type panels comprising inner and outer painted steel skins and polyurethane foam with minimum 48kg/m3 density, providing a good thermal and acoustical performance
• The gasket liner between the panels and frame ensures the air leakage rate to comply with GB/T 14294 clean air conditioning requirement
• The factory painted steel sheet covered with 6 insulation coatings, complies to 500h salt spray testing, showing an excellent corrosion protection performance
• All coils calculation and selection is done by selection software to match the required conditions
• Large coil face area ensures maximum heat transfer rate
• All coils tested at 2.76MPa pressure underwater 24 hours
• Various corrosion resistance coils for option:
-Cooper tube with cooper fins coil
-Epoxy coated fins coil
-Electrophoresis fins coil
-Heresite coated coil
• Slope type design, no drain water and keep the pan dry
• Avoid the micro-organisms growth inside the drain pan
• SS201, SS304, SS316 for option upon application
• Antimicrobial drain pan available
-SteriTouch technology Drip Pan Coating
-Antimicrobial surface
-Good corrosion resistance
-Good chemical resistance
-Excellent adhesion
-Non-toxic
• Self-developed multi sections filter improves indoor air quality
• High efficiency, low air resistance and stable
• Gas Phase Filter to adsorb mositure and VOCs
• Zeolite Filter to adsorb mositure, filter toxins, remove odors
• Various sizes available
• Cylinder monitor system ensures more efficiency, better energy saving and stable result
• Drainage pump ensures the humidifying process accurate and stable
• Clog protection system ensures to avoid water overflow
• Water temperature control system makes sure the drainage pipe won't be damaged by hot water
• Anti-electric leakage system makes operation and maintenance safe and secure
Telewin AHUs sell well both in domestic market and oversea markets
• Stable and timely supply guaranteed
• Carton box and wooden case packing available
• Customized packing acceptable
Telewin offers One Stop Solutions for
•Pharmaceuticals industry
•Electronics industry
•Automobile industry
•Printing and food industry
•Commercial building
•VOC treatment and environment protection
•Indoor air quality
•Marine ventilation
•Consultancy
•System Design
•Technical support
•Customized manufacturing
•General testing before delivery
•Spare parts supply according to order quantity
•Long warranty period
•OEM service available
Welcome co-operation of energy saving products development
1.Are you a factory?
--- Yes, we are a professional AHU manufacturer for more than 20 years.
2.How do you check the goods?
--- We inspect all the materials when they arrive, and have spot inspection during production process. All goods will be tested and double inspected before delivery, providing 100% guarantee for clients.
3. How to select the suitable models?
---The parameters above is just for your reference. We need you to provide us the air flow, ESP or TSP, cooling capacity, heating capacity or application for our team to design the suitable unit for you.
4.How and when can I get the quotation?
--- Send us the inquiry or leave us message. We will get back to you within 1 hour during the working time. All messages will be replied whenever they comes.
5.What's your payment terms?
--- Usually we accept T/T or LC. 30% deposit. Other payment terms can be discussed when orders confirmed.
6.Where is your factory Located? How can I visit there?
--- We located in Foshan, Guangdong Province, which is near Guangzhou Baiyun International Airport and Guangzhou South Railway Station. We can pick you up from the airport or railway station. You are warmly welcome to visit us!
7.Do you provide OEM service?
--- Yes! We provide OEM and ODM service.
8.What's the lead time for your goods?
--- Normally 25 workdays. For urgent orders, we can make special arrangement to fulfill your request.