Product Details

ZR-7010 Portable air particulate concentration analyzer

Product introduction
The instrument adopts principle of β-ray absorption weighing to automatically and accurately measure PM2.5 or PM10 particles captured on filter membrane, and automatically monitors concentrations of PM2.5 and PM10 in the environment continuously. The instrument is small in size, easy to carry and install, has dustproof and rainproof characteristics, and can work automatically continuously for a long time outdoors.

The instrument complies with relevant provisions of GB3095-2012 and HJ653-2013, and is widely used in routine environmental air quality monitoring, environmental assessment, scientific research, emergency monitoring and environmental air monitoring station data comparison.
Executive standard
GB3095-2012 Ambient Air Quality Standard
HJ653-2013 Technical requirements and test methods for continuous automatic monitoring system for ambient air particulate matter (PM10 and PM2.5)
Q/0212ZRB013-2014 Portable Air PM2.5 Concentration Tester
Technical characteristics
Direct measurement of mass concentration of particulate matter using advanced β-ray absorption weighing + DHS (Dynamic Heating System) principle, independent of particle physicochemical properties Impact, without correction, providing accurate data in real time, 24/7;
With dynamic temperature and humidity compensation function, in line with national standards, it can ensure accurate measurement of semi-volatile nitrates and organic matter;
Different cutters are available for real-time measurement of PM10 and PM2.5 concentrations;
Use low activity C14β source, safe and reliable;
Wide temperature industrial touch screen, easy and fast to operate;
The sampling intake pipe has a heating device, and the sampling air is automatically dehumidified according to the set humidity value;
Automatically measure parameters such as temperature, humidity and air pressure, and automatically convert the standard state sampling volume;
The instrument can automatically store historical data, can be printed on site or exported with a USB flash drive;
With digital and analog output interfaces, it is easy to connect to the data acquisition instrument for network transmission;
With wireless communication module, it can remotely query the working status of the instrument and real-time measurement data;
The instrument automatically saves the current data after power failure, and the instrument can continue to sample after the call;
The instrument has independent test procedures for broken tape, filter paper exhaustion and mechanical failure;
If there is a problem, the instrument will automatically alarm and protect the instrument;
Good portability, rapid on-site installation, AC and DC, continuous automatic operation, can be used for a variety of testing purposes;
Optional wind direction wind speed sensor with automatic heating and data logging.

Technical Parameter

Main Parameter	Parameter Range	Resolution	Maximum permissible errors
Measure Range	(0~1000)μg/m3 Or (0~10)mg/m3(Option)	0.1μg/m³	Better than±2.5μg/m³
Sampling flow	16.7L/min	0.1L/min	Better than ±2.0%
Atmospheric pressure	(60~130)kPa	0.01kPa	Better than ±0.5kPa
Ambient temperature	(-30~50)℃	0.1℃	Better than ±2.0℃
Relative humidity	(0~100)%RH	0.1%RH	Better than ±3.0%RH
Sampling power	Built-in high negative pressure sampling pump
Standard film reproducibility	Better than ±2%
Display	5.6 inch industrial touch screen
Data storage	365 day concentration data
Data interface	Support for U disk data export and thermal printer printing
Weather interface	Standard: temperature (-40 ~ 60) ℃, humidity (0 ~ 100)% selection: wind direction, wind speed
Output Interface	RS232/RS485 digital interface with 4~20mA analog output
Error alarm	Detailed history fault alarm instructions can be consulted
Work power supply	Standard AC220V ±10 + 50 Hz; Optional DC24V output power supply box
Machine Size	(Length380×Wide320×Height220)mm
Machine Weight	About 11kg
Host power consumption	≤65W

Instrument configuration

Name	List
ZR-I02C Cyclone PM2.5 Cutter (16.7L/min)	Standard: 16.7L/min; PM10 cutter cutting performance: 50% cutting particle size Da50=(10±0.5)μm; The geometric standard deviation of capture efficiency σg=1.5±0.1. PM2.5 cutter cutting performance: 50% cutting particle size Da50=(2.5±0.2)μm; The geometric standard deviation of the capture efficiency σg=1.2±0.1.
Tripod bracket	Standard configuration
ZR-I02A PM10 cutter(16.7L/min)	Optional
ZR-I02B impact PM2.5 cutter (16.7L/min))	Optional
ZR-I02D type cyclone type PM1 cutter (16.7L/min))	Optional
ZR-I02E TSP cutter (16.7L/min)	Optional
ZR-F02 type wind speed and direction instrument (mechanical type)	Optional
ZR-F02A wind speed and direction instrument (ultrasonic type)	Optional
Bluetooth printer	Optional

Dear customer,

We ,Xi’an Yima Opto-electrical Technology Com.,Ltd. is an integrated economic entity of R&D,manufacturing and trading with over 20 years of history .

Our business scope covers various fields such as biochemical analysis,environmental protection,industrial testing, bioscience,medical apparatus and instruments,internet technology and some frontier science.

Through a long-time development,we own a national resources system of various professional talents , abundant supply for various components &parts and special materials, full producing &processing equipments , strong Technological standardization and a complete quality assurance system.

If you need OEM or ODM in manufacturing ,scientific research , market development and or you want to build your own brand in your country, it’s our honor to cooperate with you.In this way ,we have developed many products for our customers from the USA, Europe and South Africa and got good feedback on Alibaba

We firmly believe that science and technology is no boundaries

Our mission is to make every effort to contribute to all humanity.