CS2350 two-channel electrochemical workstation Potentiostat /Galvanostat with RRDE and HDT function
CS2350 two-channel electrochemical workstation Potentiostat /Galvanostat with RRDE and HDT function
CS2350 two-channel electrochemical workstation Potentiostat /Galvanostat with RRDE and HDT function

CS2350 two-channel electrochemical workstation Potentiostat /Galvanostat with RRDE and HDT function

USD $8,900 - $9,800 /Set

Min.Order:1 Set

Supply Ability:
30 Set / Sets per Month
Port:
SHENZHEN
Payment Terms:
T/T Credit Card

Quick Details View All >

Brand Name:
KESITE-S
Place of Origin:
Shaanxi, China
Model Number:
CS2350

Lixian Instrument Scientific Co., Ltd.

Business Type: Distributor/Wholesaler
Main Products: Tester , , ,

Product Details

 

Introduction: 

CS2350 bipotentiostat is developed on regular single- channel CS350. There are two independent sets of built-in potentiostat/galvanostat. For each set of potentiostat, there is a set of counter/working/reference electrode. CorrTest software controls the output potential and current. 

CS2350 consists of main channel and slave channel. The slave channel applies floating mode to control the potential and current of WEII. The potential and current of WEII can independently remain constant. Tests (independent of WEI) such as linear scan and cyclic voltammetry sweep can be conducted.  

 Apart from all functions that single-channel CS350 workstation has, CS2350 can be used to do RRDE and HDT. 

Application

RRDE (Rotating ring - disk electrode)

While measuring the polarization curve of disk electrode, keep the ring electrode at a fixed polarization potential, and thus detect the intermediates of reaction on the disk electrode. It becomes the typical fluid dynamics method that detects reaction intermediates and studies electrode reaction mechanism.

HDT (Hydrogen diffusion Test)

The bipotentiostat is combined with Devnathan-Stachurski cell. By measuring cathode hydrogen charging current (the left cell) and anode oxidation current of hydrogen atoms (the right cell), it can further calculate the diffusion coefficient of hydrogen atoms in the metal and hydrogen flux.

Technical parameters:

 

Potential control range: ±10V

Current control range: ±2A

Potential control accuracy: 0.1%×full range±1mV

Current control accuracy: 0.1%×full range

Potential resolution: 10μV (>100Hz), 3μV (<10Hz)

Current sensitivity: <10pA

Potential rise time: <1μs (<10mA), <10μs (<2A)

Current range: 200nA ~2A, 8 ranges 

Reference electrode input impedance: 1012Ω||20pF

Maximum current output: 2A

Compliance voltage: ±21V

Current increment during scan: 1mA@1A/ms

CV and LSV scan rate: 0.001mV~10,000V/s

Potential increment during scan: 0.076mV@1V/ms

CA and CC pulse width: 0.0001~65,000s

DPV and NPV pulse width: 0.0001~1000s

SWV frequency: 0.001~100 kHz

Minimum potential increment in CV: 0.075mV

AD data acquisition: 16bit@1 MHz,20bit@1 kHz

Potential and current range: automatic

DA resolution: 16bit, setup time: 1μs

Low-pass filters: covering 8-decade

Communication Interface: USB2.0

Instrument net weight: 6.5Kg

Instrument dimension(cm): 36.5(W)X30.5 (D)X16 (H)

Operating System: Windows 2000/XP/ Win7/Win8/Win10

EIS 

Signal generator

Frequency range: 10μHz~1MHz

AC signal amplitude: 1mV~2500mV

Frequency accuracy: 0.005%

Signal resolution: 0.1 mV RMS

Output impedance: 50Ω

DC Bias: -10~+10V

Wave distortion: <1%

Waveform: Sine wave, triangular wave and square wave

Scan mode: Logarithmic/linear, increase/decrease

 

Signal analyzer

Integral time: maximum: 106 cycles or 105s

Measurement delay: 0~105s

Integral time: mnimum: 10ms or the longest time of a cycle

 

DC offset compensation

Potential automatic compensation range: -10V~+10V

Current compensation range: -1A~+1A

Bandwidth: 8-decade frequency range, automatic and manual setting

 

 

 CS2350 two-channel electrochemical workstation Potentiostat /Galvanostat with RRDE and HDT function

CS2350 two-channel electrochemical workstation Potentiostat /Galvanostat with RRDE and HDT function

 

Dear customer:

 

We ,Xi’an Yima Opto-electrical Technology Com.,Ltd. is an integrated economic entity of R&D,manufacturing and trading with over 20 years of history .

 

Our business scope covers various fields such as biochemical analysis,environmental protection,industrial testing, bioscience,medical apparatus and instruments,internet technology and some frontier science.

 

Through a long-time development,we own a national resources system of various professional talents , abundant supply for various components &parts and special materials, full producing &processing equipments , strong Technological standardization and a complete quality assurance system.

 

If you need OEM or ODM in manufacturing ,scientific research , market development and or you want to build your own brand in your country, it’s our honor to cooperate with you.In this way ,we have developed many products for our customers from the USA, Europe and South Africa and got good feedback on Alibaba.

 

We firmly believe that science and technology is no boundaries.

 

Our mission is to make every effort to contribute to all humanity.

 

Contact Supplier

Mobile
12540601738

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Measurement & Analysis Instruments > Analyzers > Other Analysis Instruments
Categories
Hi~