Introduction

JT-K6 new halogen rapid moisture meter can be applied in all the industries needing rapid moisture determination. All graininess, powder, sheet-shape objects and non-volatile liquid can be measured, such as grain, chemical material, medicine, plastic materials, rubber, resin, battery industry, tobacco, tea leaf, textile, meat, food, starch, fodder, coal, moulding sand, sewage sludge, milk, etc. Moisture meter of the JT-K series is the best choice as the moisture meter in the laboratory or production process.
Features

1. It is operational without installing or debugging.

2. Without the need for training. Simple operation, save excessively detailed steps.

3. Short measure time, high efficiency.

4. Uniform heating, stable property, accurate test.

5. Small size, light weight.         

6. Automatic determination, alarm reminds after measuring, doesn't need the tester's operation in the measuring process.

7. Very wide application, almost applied to moisture determination in all industries.

8. Sensor import from Germany makes the measuring effects more outstanding and accurate.

9. Unique design of hurricane globe makes the weighing system more stable.

10. Water content and solid content of the samples can be transformed at the same time.

11. Heating chamber adopts pure stainless steel, high temperature resistance, advantageous for cleaning.

Operating principles of Jingtai® JT-K6 new halogen rapid moisture meter:

Traditional moisture determination commonly uses the oven-drying method. The measurement only for one sample needs two or three hours, even three or four hours. In addition, moisture content can be calculated after weighing and manual computation. Moisture determination of the oven-drying method is inefficient, so it can far not meet the fast-paced production needs in enterprises nowadays.

 JT-K rapid moisture meter is a highly efficient moisture meter developed recently by Taizhou Jingtai Instrument Meter Co., Ltd. It adopts drying & heating apparatus of high efficiency——high-quality cyclic annular halogen lamp which can heat the samples quickly and evenly. Thus, moisture of the samples can be dried constantly. During the whole Mensuration, the automatic real-time display of measuring results is realized: sample weight, water content, solid content, measure time, heating temperature, etc.

 JT-K rapid moisture meter uses international oven-drying method principle. Therefore, its measure results are correlated well with the oven-drying method. Meanwhile, its work efficiency is much higher than that of oven-drying method. Generally, by using Jingtai® JT-K rapid moisture meter, the samples can be measured only in several minutes, which has been highly popular with consumers well.

JT-K rapid moisture meter is high-tech. With accurate determination data, it is simple and convenient in operation, without special training. The specific operating steps are as follows:

At first, put the samples need to be measured into the specimen pan evenly. Then, cover the heating mantle. Finally, press the “Start” key. The meter will complete the rest of the work automatically. After measuring, it will sound automatic alarm. At that time, the measurement results will be shown on the LCD.

Technical parameters of  JT-K6 new halogen rapid moisture meter:

Measurement range of moisture content: 0.01%-100%

Measurement range of solid content: 100%-0.01%

Maximum capacity: 110g

Weighing precision: 0.005g

Readability of moisture content: 0.01%

Heating temperature: 40-200℃                                                                                       

Display content: water content, solid content, time, temperature, weight

Display usage: LCD with backlight

Weighing sensor: sensor import from Germany, assuring accuracy of measurement

Temperature sensor: high-precision PT100 platinum heat resistance

Power supply: voltage 220v±10%   frequency 50HZ±1HZ

weighing plate size: diameter 90mm

Operating ambient temperature:5℃-35℃ is optimum.

Boundary dimension: 380mm×200mm×180mm

Net weight: 5.8kg

Security assurance: our company would take the responsibility for the freight and home delivery service, as well as the safety problem of products in transit.

After-sale service: one year warranty, life-long maintenance.

Application notice for halogen rapid moisture meter:

 JT-K6 new halogen rapid moisture meter, developed by Taizhou Jingtai Instruments Co., LTD, is easy and simple to handle. With accurate measurement and short measure time, it is very popular with users. Friendly reminder: while using Jingtai® JT-K6 new halogen rapid moisture meter, the following matters need to pay attention to:

1. Halogen moisture meter is used to measure the water content of samples. If it is used for any other purposes, it may cause personal injury and instrument damage.

2. Please be sure to read the specification carefully before using. Please do not use it under the environmental conditions not meeting safety requirements.

3. Halogen rapid moisture meter can only be used by those who are familiar with sample properties or specialized persons after training.

4. Power supply of halogen rapid moisture meter is triplex grounded socket. It is not allowed to disconnect the ground lead or use the power supply without good ground.

5. Make sure there is enough space around it, thus to avoid heat accumulation and overheating.

6. Since the neighboring regions of heating units around the meter will be hot, please do not place combustible material around it.

7. After measuring, one should be careful when taking the samples away, for that samples, heating units and the containers are still very hot.

8. During the heating and drying process, the temperature of annular heating elements will reach 400℃. Therefore, please do not open or touch the heating units. If needed, to open the heating units and disconnect the power supply until they are cooled completely.

9. As for combustible or flammable objects, as well as the matrix containing solvent or the matrix that generate combustible or flammable gas after heating, please take particular care. It is because that these samples may cause harm to the human body or the meter. Therefore, when measuring these samples, please keep the heating temperature of operation low enough, to prevent forming flame or explosive. In addition, please put on the safety device, such as goggle. If the flammability of samples is not really known about, please use sample amount as little as possible. In that case, the meter should be under supervision. Just in case, please do venture analysis before the experiment.

10. As for the matrix with toxic elements, they can only be heated and dried under the well-ventilated conditions.

11. While heating and drying, some matrix generates caustic steam. When measuring samples like this, it is suggested to reduce sample gram, because steam will congeal on relatively cold surface area, thus to produce corrosion.

Fittings of JT-K6 new halogen rapid moisture meter:

1.Number of main engine: 1,

2.Number of power line: 1,

3.Number of 100g standard weight: 1,

4.Number of aluminium specimen disc: 40,

5.Number of specimen disc holder: 1,

6.Number of specimen disc hand shank: 1,

7.Number of hurricane globe: 1,

The attached document in packaging of JT-K6 new halogen rapid moisture meter:

1.Number of product specification: 1

2.Inspection certificate of plant test: 1

3.Number of warranty card: 1

Dear customer,

We ,Xi’an Yima Opto-electrical Technology Com.,Ltd. is an integrated economic entity of R&D,manufacturing and trading with over 20 years of history .

Our business scope covers various fields such as biochemical analysis,environmental protection,industrial testing, bioscience,medical apparatus and instruments,internet technology and some frontier science.

Through a long-time development,we own a national resources system of various professional talents , abundant supply for various components &parts and special materials, full producing &processing equipments , strong Technological standardization and a complete quality assurance system.

If you need OEM or ODM in manufacturing ,scientific research , market development and or you want to build your own brand in your country, it’s our honor to cooperate with you.In this way ,we have developed many products for our customers from the USA, Europe and South Africa and got good feedback on Alibaba