Product Details

Company Information

Fast Delivery In Stock SAE1026 Cold Rolling Cylinder Pipe

Yantai Xinpeng Steel Pipe Co., Ltd,established in Dec 1992, with

registered capital of 5 million Yuan, we have more than 20 years

experience in manufacturing and exporting steel pipe. Our company is equipped with JLB250T hydraulic cold drawn

machine set,LD120 precision cold rolled machine set,multple

precision straightening machine,box heat treat furnaces(8000-

10000mm).

Q235 ordinary carbon structural steel is also known as A3 steel.

Plain carbon structural steel-plywood is a kind of steel material.

Q stands for the yield limit of this material, and the subsequent 235 is

the yield value of this material, which is around 235MPa.With the

increase of the thickness of the material, the yield value is reduced.

Due to the moderate carbon content, the comprehensive performance

is better, and the strength, plasticity and welding performance are well matched, and the use is the most widely used.

Q stands for the yield limit of this material, and the subsequent 235 is

the yield value of this material, which is around 235MPa.As the

thickness of the material increases, the yield value will be reduced

(the thickness/diameter of the plate is less than 16mm and the yield

strength is 235MPa;16mm< plate thickness/diameter is less than 40mm,

yield strength is 225MPa;40mm< plate thickness/diameter is less than

60mm, yield strength is 215MPa;60mm< plate thickness/diameter =

100mm, yield strength is 205MPa;100mm< plate thickness/diameter is

less than 150mm, yield strength is 195MPa;150mm< plate thickness/

diameter is less than 200mm, yield strength is 185MPa.Due to the

moderate carbon content, the comprehensive performance is better,

the strength, plasticity and welding properties are well matched, and the

most widely used.

It is composed of Q+ number + quality level symbol + deoxidation

method symbol.Its steel number is called "Q", which represents the

yield point of the steel. The following figure represents the yield

point value, and the unit is MPa such as Q235, indicating the yield

stress (s) is 235 MPa carbon structural steel.

A symbol indicating the quality level and deoxidization method can

be indicated after the steel number.The quality level symbols are A,

B, C and D.Deoxidization method symbol: F denotes the effervescent

steel;B means semi - calm steel: Z means composed steel;TZ says

special sedative steel, composed steel is not a symbol, namely Z and

TZ are not standard.For example, Q235-AF represents A - grade boiling

steel.Specially used carbon steel, such as bridge steel, Marine steel,

etc., basically adopts the method of carbon structural steel, but in the

end of the steel number, the letter of use is added.

USED

Our company mainly produces various specifications of cold drawn,rolled

precision steel tube,hydraulic cylinder tube and SRB(skived rolled burnished)

Tube, which are widely used in such industries as hydro-cylinder, automobile,

engineering machinery, textile machinery, printing machinery, oil drilling, etc.

Our company is also the distributor of several domestic well-known steel tube

plants in Shandong, and mainly distributes seamless steel tubes of all kinds of

materials.

HYDRAULIC PIPE

Chemical Composition

Chemical Component

Steel Grade	Chemical Compostion %
	C	Si	Mn	P	S	Cr	Ni	Cu	Al
	C	Si	Mn	≤					≥
20#	0.17-0.24	0.17-0.37	0.35-0.65	0.035	0.035	0.25	0.25	⁄	⁄
45#	0.42-0.5	0.17-0.37	0.5-0.8	0.035	0.035	0.25	0.30	⁄	⁄
Q345B	≤0.2	≤0.5	1.0-1.6	0.030	0.030	0.30	0.25	0.08	⁄
Q345D	≤0.2	≤0.5	1.0-1.6	0.030	0.030	0.25	0.25	0.15	0.015
25Mn	0.22-0.29	0.17-0.37	0.7-1.0	0.035	0.035	⁄	⁄	⁄	⁄
27SiMn	0.24-0.32	1.10-1.40	1.1-1.4	0.035	0.035	0.30	0.30	⁄	⁄
E355(ST52)	≤0.22	≤0.55	≤1.6	0.025	0.025	0.025	0.025	⁄	⁄
SAE1026	0.22-0.28	0.15-0.35	0.6-0.9	0.040	0.050	⁄	⁄	⁄	⁄

Product Description

Technique & Tolerance
	Range	size of ID	ID tolerance			WT(mm)	Ovality	Curvature
Working Method			H8	H9	H10	±5%-7.5%	≤0.10-0.20	0.3
cold drawn	25-250	>30-50	+0.039	+0.062	+0.100
cold rolling	25-150	>50-80	+0.046	+0.074	+0.120	ID>210mm
cold drawn-hone	40-250	>80-120	+0.054	+0.087	+0.140	±10%
cold drawn-SRB	50-250	>120-180	+0.063	+0.100	+0.160
cold drawn-polished	40-250	>180-250	+0.072	+0.115	+0.185
cold drawn-polished -SRB	50-250	other size and technique paramater upon request