Actuator Module Card Control Board 

GAMX-2011 

Features of  actuator module card GAMX-2011 local control board:

1.Input current 4-20madc input impedance 250 ohms

2.Output current 4-20madc output load 270 ohms

3.Built - in electronic brake, prevent mechanical sloth

4.Input break-signal actuator in place (open or close the valve as required)

5.Contactless power output AC220V

Gamx-2011 electronic locator leads terminal diagram

Debugging methods

 Connect the locator and the actuator according to the circuit diagram, and confirm the correctness. Turn on the 220V power supply and the indicator light of the positioner is on. Dial the two dial codes to OFF (manual) and turn into manual operation. Press the button of the valve to run towards the close.Press the button actuator to open and run. When fully open, rotate the full potentiometer to make the valve position output 20mA.Again repeatedly run actuator fitted and fully open and adjust the zero and full potentiometer, until the corresponding fitted valve position output 4 ma, fully open output corresponding to the valve position 20 ma, manual debugging over, finally put two dial the code switch to ON (to be automatic), the locator to automatic state, potentiometer to track the input signal, if there is turbulence can be appropriately adjusting dead zone potentiometer.

Shipment Term:

1. Orders processed timely after the payment verification .

2. Terms of Deliver: FOB / CFR / CIF / EXW etc.

3. Due to stock status and time differences , we will choose to ship your item from our first available warehouse for fast delivery .

Payment Term:

1. Accept T/T, D/A, D/P, L/C, West Union with 30% Deposit.

2. Advance payment should be made within 3 days of order .

Documents:

1. Certificate of Origin: CO, FORM A, FORM E, FORM F, FORM X ISSUED BY CCPIT / Chamber of Commerce.

2. COMMERCIAL  INVOICE

3. PACKING LIST

3. QUALITY CERTIFICATE