Product Details

(1) High quality plastic body, stainless steel operating head and controller

(2) The Speed Controller, with cruising speed control technology and IC speed detection technology, can immediately and effectively compensate the speed change that caused by the load change and power supply voltage fluctuation.

( 3) Automatic overload protection

(4) The “H” type of this series can display the speed intuitively to its digital display, in order to facilitate the acquisition of experimental data.

Technical Specifications

Model	JR500D-SH
Rated voltage	220±10% VAC
Rated frequency	50/60 Hz
Input power	850W
Output power	500W
Rated torque	178 N·cm
Work mode	S1 (continuous)
Speed control	Yes
Speed range	5000~28000 rpm
Dynamic detection speed	Yes
Speed memory function	Yes
Overload protection function	Yes
Speed display	×10 rpm LED
Timing control range	1~1000 min
Work head maximum torque	175 N.cm
Work head Material	stainless steel 316L#
Bearing material	PTFE
Standard configuration	12G
Adaptation head	18 G, 24 G, 30 G, 36 G
Permissible ambient temperature	Lower than 40°C
Permissible relative humidity	Less than 80%
Size of the mixer (T x B x H)	215×310×720 mm
Product Weight	8.7 kg
Work head parameter
Work head Model	12 G	18 G	24 G	30 G	36 G
Mixing capacity (H2O) ml	30~800	50~1500	80~5000	100~8000	150~13000
Mixing processing viscosity (cp)	1000	2000	5000	6000	7000
Rotor maximum linear velocity (m/s)	12	15	18	22	26
Work head Immersed in liquid height (mm)	35/150	45/160	50/165	60/170	65/175
Work head Diameter (mm)	12	18	24	30	36
Work head length (mm)	215	222	225	235	238
Permissible ambient temperature (°C)	120	120	120	120	120

Packing List

Order	Item	Number	Order	Item	Number
1	Heterogeneous host	1	5	Supporting and fixing frame	1
2	Base	1	6	Operating head	1
3	Supporting stand	2	7	Brusher(Spare)
4	Beam	1	8	Operation manual	1

Options:

Note: The operating head in the main picture is just for reference. The outlook of the operating head is different depending on your choice (refer to the operating head diagram). Except for the options provided here, other operating head could be chosen as well, and the price is different. Please contact us for details.

JR500D-SH	Speed Range	Operate Head	Handling Capacity	Price
Option 1	500-15000 rpm	24 G	50-5000 ml	-
Option 2	500-15000 rpm	28 G	100-8000 ml	Add USD$55
Option 3	500-15000 rpm	36 G	150-13000 ml	Add USD$165

The default option is option1. If you don't contact us to change the option, we will ship the option1 to you!

Warnings:

1)To protect the electrical motor, please do not run the mixer over 20 minutes consecutively for each use.

2) Please ensure the motor cools down completely after each use and before the next use; otherwise, the motor may be damaged.

3) Idling may damage the machine. Please place the operating head in the liquid before use. Then turn on the machine, and rotate the speed adjusting knob rightward slowly.