Laboratory Use Overhead High Speed Stirring Stirrer Mixer for high viscosity
USD $600 - $800 /Set
Min.Order:1 Set
Jiuran Instrument Equipment Co., Ltd.
JR series laboratory mixer using brushless DC motor drive for low to medium in the laboratory, the high viscosity of the liquid mixing. The aircraft structure is reasonable and compact, low noise, maintenance-free, stirring speed controlled by a microprocessor, speed changes can be immediate and effective compensation for load and supply voltage fluctuations caused by constant speed and reliable. Built-in automatic overload protection device to protect the safety tests for a long time high load continuous operation; penetrating stirred chuck, expand various types of experimental applications stir bar; stirring speed digital display, intuitive ensure experimental data collection; Stepless adjustment stirred speed, the stirring speed to meet the experiment at any time amended; stable agitation speed, high viscosity media competence stirred slurry of.
Specification:
Type | JR110W-O |
Rated voltage | AC110-220V |
Rated frequency | 50/60Hz |
Device applied voltage | DC24V |
Input power | 162W |
Output power | 110W |
Drive type | Brushless DC motor |
Stirring shaft output torque | 13.0 N.cm |
Stirring shaft output peak torque | 38.0 N.cm |
Work mode | S1 (continuous) |
Operating state display | OLED |
Operating control mode | combined control knob |
Speed adjusting range | 30-2000RPM |
Speed control type | stepless |
Timing control range | 1-6000min |
Speed dynamic detection | YES |
Speed memory function | YES |
Overload protection function | YES |
Stirring shaft fixed way | quick clamp |
Clamping range | Φ2-10mm |
Stirring shaft penetrate diameter(stop) | Φ10mm |
Stirring impeller configuration | Three blades spiral impeller |
Stirring capacity | 25L |
Stirring processing viscosity | 100000mPa.S |
Allow environment temperature | ≤40℃ |
Allow relative humidity | ≤80% |
Protection grade | IP 40 |
Size | 360 * 260 * 760mm |
Net Weight | 7.6kg |
Gross weight | 9.0 kg |