Product Details

Product Description

Brand New ASME Standard ISO Tank Container Manufacturers

20ft ISO tank container, Full Frame Potable Tank Container, which is widely used to transport kinds of liquid chemical medium.The shell is 316 stainless steel, the frame is made of strong steel Corten A or equal material, which are testing by LR.

Our 20ft iso tank container is designed as perASME standard, and meeting IMO/IMDG, ISO, UN, CSC, TIR, UIC, TC, ADR/RID L4BN.

The Capacity has 19000L, 20000L, 21000L, 24000L, 25000L, 26000L.

In addition, we also can supply SWAP Tank Container at 30000L capacity.

Specifications - ISO tank container manufacturers
Frame Dimensions (L x W x H)		6058 x 2438 x 2591 mm
Nominal Capacity		25000 litre (±0.75%)
Maximum Gross Mass		36000 kgs
Tare Mass		3510 kg (± 3%)
Design Temperature (Frame & Tank)		-40 to +130 °C
Pressure	Working	1.70 bar
	Test	2.65 bar
Material	Tank (Shell & Ends)	SANS 50028-7 Type 1.4402/1.4404 (C≤0.03%)
	Frame	SPA-H or equivalent
Insulation	Shell	Rockwool (50kg/m3) 50mm thick on aluminium foil.
	Ends	Glasswool (16kg/m3) thickness to suit on aluminium foil.
Steam Heating	6 runs. 110mm width stainless steel 304. 1" BSP inlet, 1" BSP outlet both with captive caps and cable. 4 bar working pressure, 6 bar test with warning decals and markings. A condensate drain is fitted.
Manhole	500mm low profile, 8 point fixing with Super Tanktyt Lid seal.
Safety Relief Assembly	1-off. 2½" BSP Supermaxi Highflow relive, without flameproof gauze. Pressure only set at +4.4 bar (63.8psi). The assembly is situated off centre on a tangential tank pad.
Air Inlet assembly	DN 40 ball valve terminating with 1½" BSP connection and cap. The assembly is situated off centre on a tangential tank pad.
Top Discharge	DN80 stainless steel 316 tank pad with a blind flange. The assembly is fitted on centre on a horizontal tank pad.
Bottom Discharge	DN80 45° Univalve Internal Footvalve part no. TBC fitted with an integrated butterfly valve terminating with a 3" BSP spigot with 3" BSP blind cap and chain.
Thermometer	A surface mounted analogue type is fitted to the rear end dished end of the tank. Dual scale -40°C to +160°C / -40°F to 320°F. The thermometer is fitted with a protection bar.
Document holder	A clear plastic document holder ø110mm is fitted to the rear right hand side beam. A drain hole is provided at the lowest point.
Calibration	A calibration plate marked in cm/litres is fitted on the spillbox side wall. No calibrated stainless steel grade dipstick and bracket fitted.
Design Code	ASME VIII DIV. 1
Approval	IMDG, US DOT CFR 49, RID/ADR, CSC, TC, TIR / Customs, UIC, ISO 1496/3

Detailed Image

Production Process

ISO tank container manufacture Process:

Our Company

ACE Container & Parts Co., Ltd.

We are very famous and professional Container and Parts supplier in China, and have been container line for over 10 years, also have exported our product to 85 countries by the end of 2017, including Janpan, Korea, Southeast Asia, North and South America, Affrica etc.

With the increment of requirement for offshore equipment, ACE Contianer & Parts also arrange offshore equipment production for Oil and Gas platform as per you customized requirement, all of them are design as per DNV2.7-1 & EN12079 standard.

Main Products: ISO Dry Container, Reefer Container, Offshore Equipment, All kinds of Container Parts and Customized Special Contianer

Certification

FAQ

5.1. Are your 20ft iso tank container container brand new?
Yes, all the container we provided are brand new. In fact, we will produce new container after order confirmation.

5.2 Does your 20ft iso tank container meet with international requirement?
All of our tank container will be approval by BV or LR or CCS and meet with below requirement.
ISO 1496/3
UN Transport of Dangerous Goods
UIC International Rail Approval
TIR International Transport Goods under Custom Seal
CSC International Convention for Safe Containers
DOT US Code Federal Regulations CFR49
DOT UK Carriage of Dangerous Goods
CTC Canadian Transport Commission (Rail)
AAR American Association of Railroads
FRA Federal Rail Association USA
BAM G.D.R Domestic Approval
ISO/TC11

5.3 Can you provide Drawings for confirmation?
Yes, we will provide drawing after order confirmed before production

5.4 Do you have Small or Large Volume Tank Container?
Sure, we could do Tank Container form 1000L to 60000L. And could produce offshore Tank as per DNV2.7-1 / EN12079 Standard.

5.5 Do you provide OEM Service?
Yes, we have a first-class team and could design as per your requirement.

Contact Info