Product Details

Product Description

LR Certified ASME Standard 20 Feet ISO Tank Container for Sulfuric Acid

We have the brand new 20 feet iso tank container for sulfuric acid 98% loading, which must has lining to stop the corrosion from sulfuric acid, and all valves also must has lining. So this such tank need to be do lining seaprately after production well. So this such tank the production cost is higher than other ISO Tank Container.

In addition, if you have rich experiece for tank container using, you also can use T20 type Tank Container instead of tank with lining to save cost, sicne for the T20 tank, the shell is more thicker. But the working lift is not longer than it with lining, you have to testing the shell material in due time.

Specifications - 20 feet iso tank container for sulfuric acid
Frame Dimensions (L x W x H)		6058 x 2438 x 2591 mm
Nominal Capacity		25000 litre (±0.75%)
Maximum Gross Mass		36000 kgs
Tare Mass		3510 kg (± 3%)
Design Temperature (Frame & Tank)		-40 to +130 °C
Pressure	Working	4 bar
	Test	6 bar
Material	Tank (Shell & Ends)	SANS 50028-7 Type 1.4402/1.4404 (C≤0.03%)
	Frame	SPA-H or equivalent
	Lining	PTFE
Insulation	Shell	Rockwool (50kg/m3) 50mm thick on aluminium foil.
	Ends	Glasswool (16kg/m3) thickness to suit on aluminium foil.
Steam Heating	6 runs. 110mm width stainless steel 304. 1" BSP inlet, 1" BSP outlet both with captive caps and cable. 4 bar working pressure, 6 bar test with warning decals and markings. A condensate drain is fitted.
Manhole	500mm low profile, 8 point fixing with Super Tanktyt Lid seal.
Safety Relief Assembly	1-off. 2½" BSP Supermaxi Highflow relive, without flameproof gauze. Pressure only set at +4.4 bar (63.8psi). The assembly is situated off centre on a tangential tank pad.
Air Inlet assembly	DN 40 ball valve terminating with 1½" BSP connection and cap. The assembly is situated off centre on a tangential tank pad.
Top Discharge	DN80 stainless steel 316 tank pad with a blind flange. The assembly is fitted on centre on a horizontal tank pad.
Bottom Discharge	DN80 45° Univalve Internal Footvalve part no. TBC fitted with an integrated butterfly valve terminating with a 3" BSP spigot with 3" BSP blind cap and chain.
Thermometer	A surface mounted analogue type is fitted to the rear end dished end of the tank. Dual scale -40°C to +160°C / -40°F to 320°F. The thermometer is fitted with a protection bar.
Document holder	A clear plastic document holder ø110mm is fitted to the rear right hand side beam. A drain hole is provided at the lowest point.
Calibration	A calibration plate marked in cm/litres is fitted on the spillbox side wall. No calibrated stainless steel grade dipstick and bracket fitted.
Design Code	ASME VIII DIV. 1
Approval	IMDG, US DOT CFR 49, RID/ADR, CSC, TC, TIR / Customs, UIC, ISO 1496/3

Detailed Image

Production Process

Our Company

ACE Container & Parts Co., Ltd.

We are very famous and professional Container and Parts supplier in China, and have been container line for over 10 years, also have exported our product to 85 countries by the end of 2017, including Janpan, Korea, Southeast Asia, North and South America, Affrica etc.

With the increment of requirement for offshore equipment, ACE Contianer & Parts also arrange offshore equipment production for Oil and Gas platform as per you customized requirement, all of them are design as per DNV2.7-1 & EN12079 standard.

Main Products: ISO Dry Container, Reefer Container, Offshore Equipment, All kinds of Container Parts and Customized Special Contianer

Certification

FAQ

5.1. Are your 20 feet iso tank container for sulfuric acid brand new?
Yes, all the container we provided are brand new. In fact, we will produce new container after order confirmation.

5.2 Does your iso tank containers for sale meet with international requirement?
All of our tank container will be approval by BV or LR or CCS and meet with below requirement.
ISO 1496/3
UN Transport of Dangerous Goods
UIC International Rail Approval
TIR International Transport Goods under Custom Seal
CSC International Convention for Safe Containers
DOT US Code Federal Regulations CFR49
DOT UK Carriage of Dangerous Goods
CTC Canadian Transport Commission (Rail)
AAR American Association of Railroads
FRA Federal Rail Association USA
BAM G.D.R Domestic Approval
ISO/TC11

5.3 Can you provide Drawings for confirmation?
Yes, we will provide drawing after order confirmed before production

5.4 Do you have Small or Large Volume Tank Container?
Sure, we could do Tank Container form 1000L to 60000L. And could produce offshore Tank as per DNV2.7-1 / EN12079 Standard.

5.5 Do you provide OEM Service?
Yes, we have a first-class team and could design as per your requirement.

Contact Info