Product Details

MDV95 cnc vertical machining center/vmc

Std Configuration

l Full - enclosed protective cover, XYZ track slip surface protection, and protection of steel, cutting oil installations(Cutting Oil separating tank)

l Work lights spindle lubricating oil temperature adjusting device, rear - mounted spiral chip removal device on each one, the level of alignment component

l Mechanical handling parts, automatic cut - off devices, electrical spare fuse

l FANUC 18 I control system of 10.4'' color LCD displays, auto power off function, memory length of 160 M procedures, electric leakage protection device

l Electric heat exchanger equipped with 20 disc type tool changer, and silver HIWIN Ball screws

l MDV55 configure the original Japanese OKK spindle -8000rpm gear spindle 117.5KW 25, MDV75 configuration IBAG

l When exporting countries and regions need different when transformer no further charges.

l Standard accessories:

l Iron gasket for Machine Tool and Tool box wrenches, basic installation instructions, maintenance manuals and electrical manual NC system information;

l CE Certificate is provided;

l High-prision spindle and high spindle speed: 6000~13000rpm;

Main Technical Data

Specifications	Unit	Parameter
Table(L×W)	mm	2300×950
T-slot(Numbers×Width×Distance)(b/t slots)	mm	22×125×7
Table load Max	kg	2500
The distance from spindle center line to column guide way surface	mm	1100
The distance from spindle nose end face to table upper surface	mm	150~1000
X/Y/Z travel	mm	2060/950/850
X/Y/Z guide way type		sliding guide
X/Y/Z rapid traverse speed	m/min	20/20/15
Feed rate	mm/min	1~10000
X/Y/Z servo motor power	Nm	7.0/4.0×2/7.0
Positioning accuracy	mm	±0.008/±0.005 /±0.005
Repeat positioning accuracy	mm	±0.003
Spindle motor power	kW	11/15
Spindle speed range	r/min	6000(Second level gear speed) (Special:8000rpm(Second level gear speed/13000rpm MS)
Spindle taper		No. 50
Tool magazine capacity/Type		20(Special:30)
Tool adaptor type		JISB6339 50T
Max. Tool weight	kg	30
Max. Tool diameter/length	mm	Φ110 (30Drum:Φ103)/350
Time of tool change(T-T)	sec	(T-T), 5.9 (C-C) Speed as per the tool weight
Air pressure requirement	MPa	0.5~0.8
Net weight	kg	20500
Machine covers an area of size	mm	5530×8195

Factory Overview