CDL6241 mechanical metal lathe machine
Standard: spindle head is C6, spindle hole: Φ48 mm
Spindle head is D6, spindle hole: Φ52 mm;
Guide rail width:300mm;
Guide rail hardness:HRC50, Depth1.5mm;
Hardened and ground guide ways;
Maximum load capacity between two centers: 300kg
Standard: the lathe is equipped with left-handed wheel;
Right-handed wheel shall be informed specially when placing order;
Three boxes are all self inside lubricating;
Machine tool bed box are non-clutch;
CE Certificated are not provided;
Specifications | Unit | Parameter | Parameter | Parameter |
Max swing over bed | mm | 410 | 410 | 410 |
Max swing over carriage | mm | 230 | 230 | 230 |
Center distance | mm | 750 | 1000 | 1500 |
Max swing in gap | mm | 640 | 640 | 640 |
Width of bed | mm | 300 | 300 | 300 |
Spindle nose |
| C6/D6 | C6/D6 | C6/D6 |
Spindle bore | mm | 48/52 | 48/52 | 48/52 |
Taper of spindle bore |
| M6 | M6 | M6 |
Spindle speeds | rpm | 32~2000 (12 speed) | ||
Range of inch threads | TPI | 2~56 | 2~56 | 2~56 |
Range of metric threads | mm | 0.5~14 | 0.5~14 | 0.5~14 |
Range of module threads | mm | 0.5~14 | 0.5~14 | 0.5~14 |
Range of Diametrical pitch thread | D.P | 2~56 | 2~56 | 2~56 |
Longitudinal feed | mm/rev | 0.06~0.82 (0.002"-0.032"/r) | ||
Cross feed | mm/rev | 0.017~0.242 (0.007"-0.0095"/r) | ||
Lead screw diameter | mm | 36 | 36 | 36 |
Pitch of lead screw | mm | 6 | 6 | 6 |
Taper of tailstock quill |
| M4 | M4 | M4 |
Travel of tailstock quill | mm | 150 | 150 | 150 |
Diameter of tailstock quill | mm | 60 | 60 | 60 |
Power of main motor | kW | 3/4.5 (4/6HP) | ||
Power of coolant motor | W | 90W(0.125HP) | 90W(0.125HP) | 90W(0.125HP) |
Weight | kg |
|
|
|
WOODEN CASES (L×W×H) | mm |
|
Pls send inquiry to me for optioanl accessories and other further information about such metal lathe machines.