CDS6276Cx2000 conventional horizontal lathe
(105mm spindle bore)
Such conventional lathe machine has following features:
l With CE Certificate, with GAP;
l Standard spindle head: D8; spindle hole diameter:105mm;
l 3-jaw chuck and 4-jaw chuck: Direct coupled type
l Guide rail width: 394mm
l Guide rail hardness: HRC50, Depth1.5mm
High-frequency quenching (hardness HRC50)
l Maximum load capacity between two centers: 500kg
l With mechanical clutch and mechanical braking; Electromagnetic clutch is optional;
l kinds of colors for your choice/can be customized;
l DRO is available, too, but it is optional
Specifications | Unit | Parameter |
Max. swing over bed | mm | 760 |
Max. swing over carriage | mm | 540 |
Max. swing over gap | mm | 965 |
Width of gap | mm | 250 |
Max. length of work piece | mm | 2000 |
Width of guide way | mm | 394 |
Spindle nose |
| D8 |
Spindle speed | rpm | 23~1800 |
Dia. of spindle bore | mm | 105 |
Taper of spindle bore |
| 110/1:20 |
Longitudinal feed | mm/rev | 0.044~1.48 |
Cross feed | mm/rev | 0.022~0.74 |
Metric thread | mm | 0.35~80 (53 or 77) |
Inch thread | tpi | 7/16~80 (47) |
Module thread | mm | 0.2~40 (45 or 66) |
Diametrical pitch thread | DP | 7/8~160 (42) |
Max. travel of cross slide | mm | 348 |
Travel of top slide | mm | 150 |
Travel of tailstock quill | mm | 150 |
Diameter of tailstock quill | mm | 75 |
Taper bore of tailstock quill |
| M5 |
Main motor power |
| 10HP(7.5kW)/15HP(11kW.OPTIONAL) |
Wooden box | mm | 3350×1150×1900 |
Pallet packing |
| 3280×1120×1800 |
N.W/G.W | kgs | 2370/3570 |
Pls send inquiry to me for optioanl accessories and other further information about such lathe machine.
Payment Term:
1. 30% down payment, 70% by T/T before shipment;
2. 100% LC at sight(optional and shall be discussed before placing order);
Minimum Order Quantity:
1. 1 Set;
2. ≥2 sets, there will be much discounts.
Warranty:
1. Normally, 12 months for parts as of delivery of the machines;
Shipment:
1. For machine itself, by sea or train(inland countries).
2. For documents, by international express. eg DHL, TNT or EMS.
Lathe colors can be customized according to Customers' requirements: 
New Design: