CDE6250Ax1500 horizontal gap lathe machine
1. CDE-A series horizontal lathe features mature construction, a wide range of spindle speed;
2. and it is suitable for job shops with small volume production and machinery maintenance shops;
3. The lathe can perform turning applications on I.D& O.D cylindrical surface, conical surface, end face, and also is capable of grooving, chamfering ,drilling, reaming, tapping and oil grooving.
4. Different metric, imperial, module, diametral and circular pitch threads can be produced on this lathes, too;
5. The tolerance of machined parts in this machine can reach to Class IT7 and the surface roughness goes to Ra1.6.
6. The lathe can be in metric or imperial or combination of metrica and imperial upon request.
7. Carriage wheel can be left-handed or right-handed;
8. Spindle bore diameter can be 100/105mm or 130mm optional;
9. DRO is available, too.
10. Kinds of lathe colors are availbe for customers' choice;
Specifications | Unit | Parameter |
Max. swing over bed | mm | 500 |
Max. swing over carriage | mm | 290 |
Max. swing over gap | mm | 760 |
Width of guide way | mm | 394 |
Dia. of spindle bore | mm | 52 |
Distance between centers | mm | 1500 |
Taper of center sleeve |
| Morse No.6 |
Spindle speed | rpm | 11~1400/22 speeds |
Longitudinal feed | mm/rev | 0.035~2.842 |
Cross feed | mm/rev | 0.009~0.804 |
Metric thread | mm | 0.5~240 (66) |
Inch thread | tpi | 80~1/4 (49) |
Module thread | mm | 0.25~120(57) |
Diametrical pitch thread | DP | 160~7~16 (50) |
Section of tool shank | mm | 25×25 |
Travel of top slide | mm | 150 |
Max. travel of cross slide | mm | 348 |
Pitch of longitudinal lead screw | mm | 12 |
Travel of tailstock center sleeve | mm | 150 |
Diameter of tailstock center sleeve | mm | 75 |
Taper of tailstock center sleeve | Morse | Morse No.5 |
Main motor power | kW | 7.5kW(50Hz)/5.5kW(60Hz) |
Wooden case/Steel pallet | mm | 3450/3330×1150×1900 |
Gross/net weight | kg | 2855/2120 |
Pls send inquiry to me for optioanl accessories and other further information about such lathe machines.
Payment Term:
1. 30% down payment, 70% by T/T before shipment;
2. 100% LC at sight(optional and shall be discussed before placing order);
Minimum Order Quantity:
1. 1 Set;
2. ≥2 sets, there will be much discounts.
Warranty:
1. Normally, 12 months for parts as of delivery of the machines;
Shipment:
1. For machine itself, by sea or train(inland countries).
2. For documents, by international express. eg DHL, TNT or EMS.
