1.  Full Sets Gold Extracting Machinery ,Hydraulic cutter suction dredger at your  service:

The devices include dry and wet screening sand and extracting gold devices.We design the operating manner of the whole set of the equipment according to the geographic conditions the customers supply. The device is fixed with controlling cabinet,genset,material feeding device,sand and stone separating device,waste stone transporting,high pressure injection,metal extracting device,waste material discharging device.The process is to drive to transport and feed material by power. The selected stones are discharged by the chute or transported by belts.The refined sand goes to the heavy metal extracting device passing by the sand sliding board to separate. The waste ore is transported by transporting pump (transporting belts) far away. The device can recycle yellow sand and stone at the same time besides heavy metal. The disposal ability are 50m³/h,80m³/h,100m³/h,150m³/h,200m³/h.We can design and produce the sizes according to the transporting conditions,terrain of the working site and the treatment capacity.

We can also design and produce special types of machinery according to customers’ requirements.

2. Product images for your references

 A. products images:   

B.The specification list for your reference:

 C.Our other prouducts:

D.Products under processing:

E.Spares:

  The dredge pump is driven by the main diesel engine through the gear down box.

 The alternator driven by the auxiliary diesel engine supplies the electricity for the whole ship power and lighting.

  The genet supplies th e electricity for lighting and emergency use when the ship stops.

  The cutter (bucket wheel) is dirven by hydraulic motor, the cutter(bucket wheel) bear has lubrication seal device.

  The dredger is moved by the alternate swing of the spuds. The spuds is lifted by the hydraulic cylinder.

  The shifting winch,cutter(bucket wheel) ladder lifting winches fixed on the ship are driven by the hydraulic motor.

  The hydraulic pump is driven by the auxiliary diesel engine.

F.Working shop:

Workshop Arrangement:

        Blanking workshop

        Gold panning machinery processing workshop

        Machining workshop

        Anti-corrosion workshop

        General assembly workshop

        Testing center before ex-factory

        Painting workshop

        Dismantle workshop

G.Installation site:

Our experienced installers will arrive at the construction site to guide, teach and training

your staff to debug and operate the dredger until they can operate skillfully by themselves.

H.Our company and testing pools:

 Every cutter suction dredger is built by skilled workers and inspected strictly to assure the high quality and durability. Each finished dredger will be tested in our testing center to make sure it works smoothly when delivering to customers.

I.Transportation:

 Shipping to the Tianjin Port.

Our dredger will be dismantle for different parts and then shipping to the port. The

dismantle structrue is convenient for transport in the working process if in different

 working sites.

J.Clients' visiting and cooperation:

 We have two factories. Totally 30,000 square meters. One is located in Binhai Economy Development Zone, the other is in Qingzhou Economy Development Zone. Specially, Qingzhou Factory is noted for hydraulic system and bucket chain sand dredger; Weifang Factory is mainly for cutter suction dredger painting, assemble, testing and dismantle for shipping.