Product Details

CE High Output Soft Low-e Continuous Force Convection glass toughening furnace

1.Brief introduction of glass toughening furnace

1).Much longer heating section and tempering section ensure that the glass sheets can be heated in heating section to right temperature and then tempered, cooled quickly without oscillation.

2).Flexible driving speed control for different glass heating stage; logic servo controlled continuous mode and complete continuous mode can be switched between for large or small size glass sheets.

3).Continuous running blowers ensure energy saving.

2.Picture of glass toughening furnace

3.Technical parameter of glass toughening furnace

Type	Max. size(mm)	Min. size(mm)	Thickness(mm)	Capacity(m2/h)	Power supply capacity(KVA)
HP1506	1500*600	90*90	3-8	14	≥100
HP1508	1500*800	100*100	3-12	18	≥150
HP2010	2000*1000	100*100	3-12	30	≥200
HP2012	2000*1200	120*120	3-12	37	≥250
HP2512	2500*1200	120*120	3-12	46	≥250
HP2515	2500*1500	150*250	3-19	57	≥315
HP3015	3000*1500	150*250	3-19	69	≥400
HP2518	2500*1800	150*250	3-19	69	≥400
HP3018	3000*1800	150*250	3-19	83	≥400
HP3618	3660*1800	150*250	3-19	99	≥500
HP3021	3000*2100	150*250	4-19	96	≥500
HP3621	3660*2100	150*250	4-19	116	≥600
HP4221	4200*2100	150*250	4-19	135	≥700
HP3624	3660*2440	150*250	4-19	132	≥630
HP4224	4200*2440	150*250	4-19	154	≥800
HP5024	5000*2440	150*250	4-19	184	≥1000
HP6024	6000*2440	150*250	5-22	220	≥1000
HP5028	5000*2800	200*300	5-22	214	≥1000
HP6028	6000*2800	200*300	5-22	257	≥1250

4. Factory Picture

Only our glass product factory covers 60000 square meters production workshop and professional production line. With more than 50 years’ history and nearly 20 years’ glass products exporting experience, it enjoys a high reputation among the same industry both at home and abroad.

5.Quality standard

1)The product meets Chinese national quality standard<GB 15763.2-2005>

2)Glass stress equilibrium, particle

3)Quality of all finished glass is the same

4) Heat resistance: conform to international standard

6. Technical features

1) Adopting Jet Convection heating technology and have a flat quenching section and a bending

quenching section

2) Each bending system has one individual fine adjusting device, slightly adjusting the local curve

necessarily for the best possible quality products.
3) Adopting precise screw pairs in bending mechanism, which ensures smooth curve of bent glass.

There will be no accumulated error in bending mechanism.

4) Different curves can be set and achieved by simply input the numbers via human-machine

interface. With precise screw pairs in bending mechanism and servo control system, the end

products are of high quality.

7.Customer visiting

8.Electric parts configuration

Electric parts	Top Brand
Electrical system	Omron(Japan),Siemens(Optional)
Ceramic rollers	Zhongcai(China famous brand), VSV(Optional)
Insulated cotton	Luyang(China), ISOLITE(Optional)
Heating wire	Cr15Ni60
motor	Made in china, ABB(Optional)
Frequency inverter	Schneider(France),CONVO(Germany),Mitsubishi(Optional)