Curved Gass Bending Tempered Glass Oven/Tempering Machine
Brief introduction of Tempered Glass Oven
Glass Bending Machine is used for producing large-size flat, bent tempered glass for architecture, and multi-curvature bent tempered glass for automobile, shower cabins and kitchen, etc. The type of sheet glass including float glass, coated glass, tinted glass,soft low-E glass etc.
Picture of Tempered Glass Oven
Technical parameter of Tempered Glass Oven
Type | Max size (mm) | Min size (mm) | Thickness (mm) | Capacity (m2/h) | Necessary power (KVA) |
HPW1510H10 | 1500*1000 | 200*500 | 5-19 | 500 | 15-18 |
HPW1810H10 | 1800*1000 | 200*500 | 5-19 | 500 | 15-18 |
HPW2110H10 | 2100*1000 | 200*500 | 5-19 | 500 | 15-18 |
HPW2410H10 | 2400*1000 | 200*500 | 5-19 | 500 | 15-18 |
HPW1515H15 | 1500*1500 | 200*500 | 5-19 | 750 | 15-18 |
HPW1815H15 | 1800*1500 | 200*500 | 5-19 | 750 | 15-18 |
HPW2115H15 | 2100*1500 | 200*500 | 5-19 | 750 | 15-18 |
HPW2415H15 | 2400*1500 | 200*500 | 5-19 | 750 | 15-18 |
HPW1518H18 | 1500*1800 | 200*500 | 5-19 | 900 | 15-18 |
HPW1818H18 | 1800*1800 | 200*500 | 5-19 | 900 | 15-18 |
HPW2118H18 | 2100*1800 | 200*500 | 5-19 | 900 | 15-18 |
HPW2418H18 | 2400*1800 | 200*500 | 5-19 | 900 | 15-18 |
HPW2425H25 | 2400*2500 | 200*500 | 5-19 | 1200 | 15-18 |
Electric parts configuration of Glass Bending Furnace
Electric parts | brand |
Electrical system | Omron(Japan),Siemens(Optional) |
Ceramic rollers | Sinoma (China famous brand), VSV(Optional) |
Insulated cotton | Luyang(China), ISOLITE(Optional) |
Heating wire | Cr15Ni60 |
motor | Made in china, ABB(Optional) |
Frequency inverter | Schneider(France),CONVO(Germany),Mitsubishi(Optional) |
Main parts of Glass Bending Furnace
Factory assembly picture of Glass Bending Furnace
Quality standard of Glass Bending Furnace
1)The product meets Chinese national quality standard<GB 15763.2-2005>
2)Glass stress equilibrium, particle
3)Quality of all finished glass is the same
4) Heat resistance: conform to international standard
Technical features of Glass Bending Furnace
1)Adopting Jet Convection heating technology and have a flat quenching section and a bending quenching section
2)Each bending system has one individual fine adjusting device, slightly adjusting the local curve necessarily for the best possible quality products.
3)Adopting precise screw pairs in bending mechanism, which ensures smooth curve of bent glass. There will be no accumulated error in bending mechanism.
4)Different curves can be set and achieved by simply input the numbers via human-machine interface. With precise screw pairs in bending mechanism and servo control system, the end products are of high quality.
Packing picture of Glass Bending Furnace
1)Installation and Training
Technicians are available to serve overseas for installing and training.
2)Warranty
one year quality guarantee or the whole machine except for the man-made damage and force majeure circumstances. Lifelong maintenance. Customer response service time within 12 hours.
3)Cost
Above mentioned travel expense is on the buyer, including the round ticket, accommodation cost
and the daily wage.
of Glass Be
China Glass Tech Co.,Ltd was founded in 1998, formerly known as Shandong Huaxing Glass Tech Co., Ltd. Mainly engaged in R&D and manufacturing of glass deep processing technologies and glass deep processing devices.
We are membership units of China Building Glass and Industrial Glass Association, and 10 strong units of Shandong Building materials industry.
Factory profile of Glass Bending Furnace