Product Details

Energy Saving Forced Convection Tempered Glass Production Line

1.Brief introduction

Glass Tempering Furnace is used for producing large-size flat, bent tempered glass for architecture, and multi-curvature bent tempered glass for automobile, shower cabins and kitchen, etc.The type of sheet glass including float glass, coated glass, tinted glass,soft low-E glass etc.

2.Picture of Glass Production Line

3.Technical parameter of Glass Production Line

Type	Max size	Min size	Thickness	Capacity	Power supply capacity(KVA)
HPQ2515	2500*1500	150*250	3-19mm	68	≥315
HPQ3015	3000*1500	150*250	3-19mm	83	≥400
HPQ2518	2500*1800	150*250	3-19mm	83	≥400
HPQ3018	3000*1800	150*250	3-19mm	100	≥400
HPQ3618	3600*1800	150*250	3-19mm	119	≥500
HPQ3021	3000*2100	150*250	4-19mm	115	≥500
HPQ3621	3600*2100	150*250	4-19mm	139	≥630
HPQ4221	4200*2100	150*250	4-19mm	162	≥630
HPQ3624	3600*2400	150*250	4-19mm	158	≥630
HPQ4224	4200*2400	150*250	4-19mm	185	≥800
HPQ5024	5000*2400	150*250	4-19mm	221	≥1000
HPQ6024	6000*2400	150*250	5-22mm	264	≥1000

4.Main parts

5.Quality standard

1)The product meets Chinese national quality standard<GB 15763.2-2005>

2)Glass stress equilibrium, particle

3)Quality of all finished glass is the same

4) Heat resistance: conform to international standard

6.Factory assembly

7.Tempered glass application area

1)Laminated tempered glass: Architectural glass, tempered glass, bending glass, bullet-proof glass, art glass sandwiched with true flower, silk, cloth, pattern, photo etc.

2)Windshield for cars, trains, military vehicles and ships

3)Solar pv panel/led laminated glass

8.Factory profile

Our company established in 1957 and it has 57 years’ experience on glass production including float glass, tinted glass, tempered glass, laminate glass, insulated glass, art glass etc.

9.Electric parts configuration

Electric parts	brand
Electrical system	Omron(Japan),Siemens(Optional)
Ceramic rollers	Zhongcai(China famous brand), VSV(Optional)
Insulated cotton	Luyang(China), ISOLITE(Optional)
Heating wire	Cr₁₅Ni₆₀
motor	Made in china, ABB(Optional)
Frequency inverter	Schneider(France),CONVO(Germany),Mitsubishi(Optional)

10.Packing and shipping

1) wrapped by plastic film

2) according to customers' requirement

11.Technical features

1)Adopting Jet Convection heating technology and have a flat quenching section and a bending quenching section

2)Each bending system has one individual fine adjusting device, slightly adjusting the local curve necessarily for the best possible quality products.
3)Adopting precise screw pairs in bending mechanism, which ensures smooth curve of bent glass. There will be no accumulated error in bending mechanism.
4)Different curves can be set and achieved by simply input the numbers via human-machine interface. With precise screw pairs in bending mechanism and servo control system, the end products are of high quality.

12.Certificates

13. Our service

1)Installation and Training

Technicians are available to serve overseas for installing and training.

2)Warranty

one year quality guarantee or the whole machine except for the man-made damage and force majeure circumstances. Lifelong maintenance. Customer response service time within 12 hours.

3)Cost

Above mentioned travel expense is on the buyer, including the round ticket, accommodation cost

and the daily wage.