ADI AD7689BCPZ-RL7 NEW and ORIGINAL 18+ LFCSP-20 (16-Bit, 8-Channel,250 kSPS PulSAR ADC)
USD $7.9 - $8.5 /Piece
Min.Order:1500 Pieces
Xueyu Technology (HK) Electronics Co., Ltd.
ADI AD7616BSTZ NEW and ORIGINAL 18+ LQFP (Dual Simultaneous Sampling ADC)
ADR444BRZ ADI NEW and ORIGINAL 18+ SOP 4.096V Voltage Reference w/Current Sink and Source
ADI AD2S1205YSTZ NEW and ORIGINAL 16+ SOP (12-Bit R/D Converter with Reference Oscillator)
OP297GSZ ADI NEW and ORIGINAL 16+ SOP (Low Bias Current Precision (Dual) Operational Amplifier)
OP291GSZ ADI NEW and ORIGINAL 16+ SOP ADI (Micropower Single-Supply RRIO Dual Op Amp)
AD7689BCPZ-RL7
(ADI New and Original)
16-Bit, 8-Channel,250 kSPS PulSAR ADC
Features and Benefits
16-bit resolution with no missing codes
8-channel multiplexer with choice of inputs
Unipolar single-ended
Differential (GND sense)
Pseudobipolar
Throughput: 250 kSPS
INL: ±0.4 LSB typical, ±1.5 LSB maximum (±23 ppm or FSR)
Dynamic range: 93.8 dB
SINAD: 92.5 dB at 20 kHz
THD: −100 dB at 20 kHz
Analog input range: 0 V to VREF with VREF up to VDD
Multiple reference types
Internal selectable 2.5 V or 4.096 V
External buffered (up to 4.096 V)
External (up to VDD)
Internal temperature sensor (TEMP)
Channel sequencer, selectable 1-pole filter, busy indicator
No pipeline delay, SAR architecture
Single-supply 2.3 V to 5.5 V operation with 1.8 V to 5.5 V logic interface
Serial interface compatible with SPI, MICROWIRE, QSPI, and DSP
Power dissipation
3.5 mW at 2.5 V/200 kSPS
12.5 mW at 5 V/250 kSPS
Standby current: 50 nA
Low cost grade available
20-lead 4 mm × 4 mm LFCSP package
20-lead 2.4 mm × 2.4 mm WLCSP package
Product Details
The AD7682/AD7689 are 4-channel/8-channel, 16-bit, charge redistribution successive approximation register (SAR) analogto-digital converters (ADCs) that operate from a single power supply, VDD.
The AD7682/AD7689 contain all components for use in a multichannel, low power data acquisition system, including a true 16-bit SAR ADC with no missing codes; a 4-channel (AD7682) or 8-channel (AD7689) low crosstalk multiplexer that is useful for configuring the inputs as single-ended (with or without ground sense), differential, or bipolar; an internal low drift reference (selectable 2.5 V or 4.096 V) and buffer; a temperature sensor; a selectable one-pole filter; and a sequencer that is useful when channels are continuously scanned in order.
The AD7682/AD7689 use a simple SPI interface for writing to the configuration register and receiving conversion results. The SPI interface uses a separate supply, VIO, which is set to the host logic level. Power dissipation scales with throughput.
The AD7682/AD7689 are housed in a tiny 20-lead LFCSP and 20-lead WLCSP with operation specified from −40°C to +85°C.