Product Details

1.Description of capacitive static liquid hydrualic air absolute pressure transmitter:

Capacitive Pressure Transmitter is the result of a combination of self-developed anti-jamming, high stability digital circuits and the introduction of foreign Single crystal resonant silicon sensor technology. Its performance much better than our domestic metal capacitive sensor technology transmitter, and main show in the field zero stability and long-term operation stability, and rapid response.

2.Feature of capacitive static liquid hydrualic air absolute pressure transmitter:

Single crystal resonant silicon sensor technology

Super performance, use to measure pressure, differential pressure and temperature..

Accuracy: ±0.075%~±0.1%F.S/±0.2%F.S

Stability: ≤0.2%

Standard 4~20mA,RS-485 communication interface

Support upgrade of basic scene control technique

Little temperature effect

Little static effect

Overload can reach 2 times

3.Application of capacitive static liquid hydrualic air absolute pressure transmitter

Compatible with 316LSS,noncorrosive liquids.

Shipping and aviation industry.

Hydraulic pressure and pneumatic control system

Apply in Petroleum industry, chemical industry, electric power, metallurgy, hydrology etc process control.

4.Specification of capacitive static liquid hydrualic air absolute pressure transmitter:

Reference condition:zero is the lower limit and not offset, temperature 25℃, Atmospheric pressure, 24VDC power,silicon oil , diaphragm 316L, data adjust range the same as the up and lower limit of the range.

Accuracy:±0.075~±0.2%

Stability:≤0.2%URL/year

Temerature influence:±(0.05%URL+0.15%FS+200Pa)20℃

Static pressure influence:zero error 0.1URL/6.9Mpa;

zero error 0.1URL/1.7MPa

Vibration influence:withstand frequency 200Hz at any direction, arouse error ±0.05%URL

Power influence:<0.005%/V

Load influence:no load influence

Mounting position influence:about 250Pa zero offset, can be eliminate via calibration, no range influence.

RF interference influence:drift is ±0.1%span in the condition of 30-1000MHz frequency and the most field intensity 10V/m

Analog output: two –wire 4-20mADC

Digital output: two –wire 4-20mADC and superimposing variable digital signal accord with HART

Power supply:24VDC

Limit load:Max load resistor Rmax in loop decided by the supply voltage, see the below drawing. HART PROTOCOL require the load resistor not less than 250Ω,not more than 600Ω

Communication distance:Max. 1.5Km, multi-address communication can connect 15 smart transmitters Max.

Display:4 digital display,5 digit LCD display, pointer type.

Explosion-proof:ExiaIICT5;explosion suppression type

Zero offset:Can positive transfer or negative transfer, but can not overstep the utmost value

Ambient temperature -40-85℃(When choose LCD : -20-70℃)

Medium temperature:-40~104℃

Static pressure and single side overpressure:3.45KPa(absolute pressure)~31.2MPa(gauge pressure)

Relative humidity:5~98%RH

Run-up time:less than 5 sec.

Capability change:Less than 0.16cm3

Damp adjust:0.20~25 second

Malfunction alarming:If occur malfunction, automatism diagnose function will output 3.9 or 21.0mA