Marine Electrical Cable, buy Oil Resistance Marine Electrical Cable Maritime Affairs 0.19 Shares on China Suppliers Mobile

Product Details

Specification：

ROV Tethers include power conductors, shielded data pairs and video using coax, TSP, or fi ber optics. Designs available in several confi gurations, including Neutral Buoyancy.A varied degree of strength designs available depending on workloads and handling system.

Cable Hydraulic Rating:

Water pressure classification	The following are the same as the Resistant to vertical hydraulic capacity			The following are the same as the Resistant to horizontal hydraulic capacity
Water pressure rating	4.5MPa	6.0MPa	10.0MPa	10.0MPa	70.0MPa
Single core	Multi-strand tinned copper wire stranded conductor, conductor cross-sectional area of 0.12mm² -16mm² . Conductor stranded with water blocking glue.			Multi-strand tinned copper wire or silver-plated copper wire stranded conductor, conductor cross-sectional area of 0.035mm² -16mm² .
Multiple core lines	Multi-strand tinned copper wire stranded conductor, conductor cross-sectional area of 0.12mm² -16mm² , twisted pair: 2 pairs of -91 pairs. Each pair: tinned wire weaving (when shielding); Total shielding: Tinned wire weaving (when shielding is required). Conductor stranded, woven, into the cable are filled with water blocking plastic.			Multi-strand tinned copper wire or silver plated copper wire stranded conductor, conductor cross-sectional area of 0.035mm² -16mm² , core number: 2 core -91 core. Each shield: tinned wire weaving (when shielding); Total shielding: tinned wire weaving, or aluminum foil wrap + tinned wire weaving (when shielding). Filled with sealant.
Many pairs of core	Multi-strand tinned copper wire stranded conductor, conductor cross-sectional area of 0.12mm² -16mm² , twisted pair: 2 pairs of -91 pairs. Each pair: tinned wire weaving (when shielding); Total shielding: Tinned wire weaving (when shielding is required). Conductor stranded, woven, into the cable are filled with water blocking plastic.			Multi-strand tinned copper wire or silver-plated copper wire stranded conductor, conductor cross-sectional area of 0.035mm² -16mm² , the number of cores: 2 pairs of -91 pairs, shielding form: Each pair: tinned wire weaving, or aluminum foil + tinned wire (when required shield) weave, or aluminum foil + drainage line Total shielding: tinned wire weaving, or aluminum foil wrap + tinned wire weaving (when shielding). Filled with sealant.
Operating temperature	-50℃-80℃
Short temperature	Resistant to 130 ℃, 2h low temperature vulcanization of 3m vulcanized rubber
Sheath material	Polyurethane, rubber
Resistant to seawater	Be applicable
Underwater robot cable test standard	GJB1916-94，GJB774-1989，MIL-DTL-24643

Description:
The cable is mainly used for electrical connection between devices and requires work in an underwater environment. According to the signal transmission requirements, the signal control line can be multi-stranded single-core, multi-core, many pairs of different combinations of the core composition; according to the isolation requirements, shielding forms can be individually single shield, separate 2 layer shield, single Layer total shielding, 2 layers of the total shielding, etc .; according to the use requirements, can be vertical underwater robot cable form, horizontal seal form.
Vertical underwater cable: for the ship to wear a warehouse connection, high reliability of the use of the environment. Requires the cable end (axial) to withstand water pressure, in the eng_provisions of the test pressure and time, not allowed to water seepage.
Horizontal underwater cable: non-wear underwater use of the environment. Requirements cable jacket (radial) to water pressure, in the eng_provisions of the test pressure and time, the cable insulation resistance does not decline, the cable is not deformed.