Banana Cutting Machine |Banana Slicer Machine|High Quality Banana Slicing Machine|

Plantain Chips Slicer Machine|Banana Chips Slicer|Banana Cutting Machine

Plantain Chips Slicer Machine Introduction:

The appearance of the plantain chips slicer machine is beautiful, easy to operate, and the output is high. It can be equivalent to more than a dozen laborers and greatly reduce labor costs. The same brand of apple slicing machine is very durable and made of pure stainless steel. It can be widely used and can cut pineapple, orange and lemon. Bananas, quail, bitter gourds, cucumbers, potatoes, sweet potatoes, cassava, eggplant, etc., need to be sliced vegetables and fruits.

Features of Banana Cutting Machine:

1 .Rotary cutter head cutting; uniform thickness and cutting section, fresh cut tissue, no damage to the fibrous tissue of fruits and vegetables;

2 .High efficiency and low energy consumption;

3. Machine made of high quality stainless steel, safe, sanitary, beautiful, durable.

The Maintenance of Automatic Banana Cutting Machine:

1. All the vegetable cutter maintenance work must be carried out with the power off; in addition, the clean and tidy and well-lit lighting of the vegetable cutting room has become an important prerequisite for the safe operation of the vegetable cutting machine.

2 .The automatic banana cutting machine needs to be cleaned after each use. Ensure cleanliness and ensure that there are no residues of foodstuffs and materials;

3.Before starting the work, use the handy wave wheel to observe if there is a knocking prop phenomenon. After starting the switch, observe at the entrance and turn the cutter counterclockwise to be correct; otherwise, adjust the power cord;

4. Cut vegetables while cutting, do not put stones or metal substances, to prevent the knife edge chapped.

5 .Before the normal work, try cutting and observe whether the specifications and requirements of the cut vegetables are the same; otherwise adjust or replace the height of the blade and the turntable until the adjustment is correct and then start the batch normal work;

6 .After the equipment has been used for a period of time, check whether the screws in each area are loose. If it is found to be loose, tighten the screws; if the screws appear to slide, replace them with new ones.

7. When there is abnormal operation and noise, stop and inspect immediately. After troubleshooting, turn it on again.

When not using the cutting machine for a long time, place it in a dry and ventilated place.

Banana Cutting Machine Parameters:

Contact Us:

If you are interested with our banana cutting machine,please contact with me!

Email: ellie@machinehall.com

Whatsapp:+8618595717505

Skype: leo.liufan

Automatic Banana Cutting Machine Parameters