F2000TSM-CO-C101 Carbon Monoxide (CO) Detector and Transmitter
Negotiable /Piece
Min.Order:1 Piece
Carbon Monoxide Detector And Transmitter
Model#: F2000TSM-CO-C101
• Real time detect and transmit ambiance carbon monoxide level
• Up to more than five years lifetime
• 1x analog output for linear measurement
• Modbus RS485 interface
• The highest performance with the lowest price
F2000TSM-CO-C101 Carbon Monoxide Detector and Transmitter Description
F2000TSM-CO-C101 Carbon Monoxide Detector and Transmitter Features
• Wall mounting, real time detect CO level with measuring range of 0~100ppm/ 0~200pm/ 0~500ppm.
• Electrochemical sensor which offer several advantages over traditional electrochemicalsensors.
• With a long life, good long term stability, and high accuracy, the CO sensor is environmentally friendly without risk of electrolyte leakage.
• With simple calibration
• The special design of easy sensor's replacement makes customers replace sensor easily by themselves
• Full time CO level detection, even the slightest leak can be detected
• One analog output of the measurement of carbon monoxide concentration with 0~10V/4~20mA selectable
• Special built-in Self-Zero Correction algorithm.
• Modbus RS-485 communication with 15KV antistatic protection, also can be calibrated carbon monoxide measurement via the interface
F2000TSM-CO-C101 Carbon Monoxide Detector and Transmitter Application
• Residential and commercial CO detectors and transmitters
• Ventilation control for indoor parking garages
• Recreational vehicle CO detectors
• Kitchen rooms and restaurants
• Freezing machine rooms and other places where air quality is easy to worsen
F2000TSM-CO-C101 Carbon Monoxide Detector and Transmitter Specifications
CO Measurement | |
Gas detected | Carbon monoxide |
Sensing element | Battery operable electrochemical sensor |
Gas sample mode | Diffusion |
Warm up time | 1hour (first time) |
Response Time | Within 60 seconds |
Signal Update | 1s |
CO Measuring Range | 0~100ppm(default) 0~200ppm/0~500ppm selectable |
Accuracy | <±1ppm (at 20±5°C/ 50±20%RH) |
Stability | ± 5% (over 900 days) |
Electrical | |
Power Supply | 24VAC/VDC |
Consumption | 1.5 W |
Wiring connections | 5 terminal blocks (max.) |
Outputs | |
Linear analog output | 1x0~10VDC/4~20Ma selectable in order |
D/A resolution | 16 bit |
D/A conversion accuracy | 0.1ppm |
Modbus RS485 Communication interface | Modbus RS485 interface 9600/14400/19200(default), 28800 bps, 38400 bps (programmable selection), 15KV antistatic protection |
General Performance | |
Operation temperature | 0~60°C (32~140°F) |
Operation humidity | 5~99%RH, non condensing |
Storage conditions | 0~50°C (32~122°F) |
Net Weight | 190g |
Dimensions | 100mm x 80mm x 28mm |
Installation standard | 65mm x 65mm or 2" x 4" junking box |
Housing and IP class | PC/ABS fireproof plastic material, protection class: IP30 |
Compliance | EMC Directive 89/336/EEC |
Carbon Monoxide Detector and Transmitter Models
ITEM | MODEL | DESCRIPTION |
Carbon Monoxide Transmitter | F2000TSM-CO-C001 | Carbon monoxide transmitter with Modbus RS485 communication interface |
Carbon Monoxide Transmitter | F2000TSM-CO-C101-V/A | Carbon monoxide transmitter with one 0~10VDC/4~20mA output. Modbus RS485 communication interface |
CO range (postfix after the model):
001: 0~100ppm (default)
002: 0~200ppm
005: 0~500ppm