Model: CJBH-B
Discription
Fix it on container by pipe flange, it is suitable for measuring high temperature, high viscosity easy precipitation or strongly aggressive media.Level membrane component is plug-in or plane type.Flange Diameter is 3 Inch and 3 Inch.Pressure Grade is 150Ib and 300Ib. User can choose 316 stainless steel, hastelloy alloy or tantalum membrane depend on media.
Technical Parameter
Output: Analog: 2 wire 4-20 mADC; Digital; 2 wire 4-20mADC and utilize hard protocol procedure variable digital signals.
Power Voltage: 12.5-45VDC
Load Limit: Rmax depend on power voltage.Hart protocol requires load resistance less than 250Ω and no more than 600Ω
Communication distance: MAX: 15Km, can connect to 15 units intelligent transmitters
Output: 4 bit digital display, 5 bit LCD screen, pointer type
Explosion-proof: ExiaIICT5; isolating explosion
Zero Shift: ‘Zero’ point can be transferred positive or negative, but can’t exceed upper and lower limit and Max measure Range.
Temperature Range: -20℃~85℃(When choose LCD indicator, it is -20℃~70℃)
Media Temperature: -40℃~104
Static Pressure and one-way Over-pressure Range: 3.45KPa(absolute pressure)～31.2MPa（gauge）
Relative Humidity: 5-98%RH
Setup time: within 5 sec.
Capacity variation: less than 0.16cm3
Damping adjustment: time constant 0.20-25 sec.
Trouble Alarm: if sensor has troubles and it can automatic diagnosis and output 3.9 or 21.0Ma
Configuration protection: in order to avoid of correcting the configuration datas of transmitter,
can lock stored data by software or protection switch.
