Name: ASTM A213 T22 Tube
Availability: InStock

Product Details

In order to improve its mechanical properties, steel is alloyed with a variety of elements in total amounts of 1.0% to 50% by weight to produce alloy steel. Alloy Steel, in addition to carbon, also contains substantial amounts of elements like nickel, tungsten, molybdenum, chromium, silicon, manganese, vanadium and small quantities of a few commonly used elements such as sulphur, silicon and phosphorous. The addition of these alloying elements complements the steel with increased strength, chemical resistance and hardness.
Sunny Steel is a leading brand in the market of Steel products and exports and one of our known products include ASTM A213 T22 Tube. The most useful properties of ASTM A213 T22 Tube, which make them efficient include features like enhanced strength, toughness, hardness, hardenability, wear resistance, corrosion resistance and hot hardness and our product has been manufactured to provide them all.
For Our Customers:
We will deliver quality, cost-effective ASTM A213 T22 Tube that meet your specifications.
We will work with you to make sure you get what you need, when you need it.
We will provide you with the best customer service possible.
We will keep our equipment updated and maintained.
We will use the highest quality materials.
ASTM A213 T22 Tube Quick Details

ASTM A213 T22 Tube, A213 T2, ASTM A213 T22, ASTM A213, alloy steel, 


 

Main grade:

ASTM A213, ASTM A213 T91, ASTM A213 T22, ASTM A213 T12, ASTM A213 T11, ASTM A213 T9, ASTM A213 T5

ASTM A213 Standard Scope

1.1 This specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes, designated Grades T5, TP304, etc. These steels are listed in Tables 1 and 2.

1.2 Grades containing the letter, H, in their designation, have requirements different from those of similar grades not containing the letter, H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements.

1.3 The tubing sizes and thicknesses usually furnished to this specification are 1/8 in. [3.2 mm] in inside diameter to 5 in. [127 mm] in outside diameter and 0.015 to 0.500 in. [0.4 to 12.7 mm], inclusive, in minimum wall thickness or, if specified in the order, average wall thickness. Tubing having other diameters may be furnished, provided such tubes comply with all other requirements of this specification.