DTII fixed belt conveyor is the upgrade product fromTD75,its adaptability is stronger, and be widely used, it’s widely used in metallurgy, mining, coal,chemical industry and so on for bulk materials and packaged product conveying.Single equipment can be used, multiple or composition with other conveyors forhorizontal or inclined conveying system. The operation temperature of beltconveyor is from -25℃～40℃,and request temperature of conveyedmaterials not exceed 60℃；The heat resistance rubber belt can convey the high temperaturematerials that below 120℃,the belt conveyor is not suitable for convey higher temperaturematerials. The oil-resistance, acid resistance rubber belt are used to conveyacid, alkaline, oil materials and some materials with organic solvent.

Application:

Power, Metallurgy, Construction, Light industry,Grain, Mining industry and so on.

Our products advantages:

1. The range of conveyed materials is widely.Wet, dry, powder, block materials and packaged product are can be used beltconveyor;

2.The capacity is large, the convey distanceis length;

3.Multiple spot feeding and discharge can berealized in one belt conveyor;

4. Continue operation , running steady andsmall noise;

5. Simple structure, work reliable , easyoperation ,installation and maintenance.

Structures of DTII fixed belt conveyor:

1.The driving system of belt conveyor has open drivedevice and closed drive device. The open drive device is consist of motor, highspeed coupling, brake, reducer gears, low speed coupling and roller bearing.They are assembled on the steel structure base(Below 100kW usually)or concretebase(more than 115kW usually). Closed drive device means electric drum, it’s a drive device that put motor and reducergears in rotary drum, compare with open drive device, the closed system hascompact structure , operation safety , small footprint, light weight, goodappearance and low cost characteristics. Electric drum of TD 75 belt conveyorhas various configuration ,such as power from 1.5 to 13kW,diameter of drum from320 to 800mm,belt speed 0.8 to 40m/s and belt width from 500 to 1400mm.

2.There are impact idlers in the feeding place of beltconveyor to reduce the impact from materials.

3.To avoid the belt running deviation, one groove typealigning idler is installed between 10 carrying idler during loading section;and level aligning idler is installed in unloading section between each 6-10carrying idler.

4.There are three types tension device for beltconveyor, such as spiral tension, vehicle tension and vertical tension,choosing according to tension force, tension range and tension location, thelatter two need bigger installation space, but the tension force is constantand tension range is larger, which suitable for long distance belt conveyor.

contact: Annchen

Email ID:ec03@zkcorp.com

/Conveyor/876.html