Production introduction:          

Bag filter is a kind of dry dust filtration device. Our company can provide design, manufacture, and installation one-stop service for bag filter. Our product range mainly include bag filter, single bag filter, pulse bag filter, mechanical reverse air bag filter, wet bag filter and bag filter parts.

Application:               
Electric power, metallurgy, chemical and building materials industry.

Features and Advantages:                     

1. Reliable design ensures the bag filter stable and long-term operation with the other main equipment and little maintenance.
2. Optimized duct design will be in favor of uniform air distribution.
3. Air leakage prevention design ensures the lowest air leak rate for the bag filter.
4. Steel sub-structure design, which would be easy for transport and installation of the equipment.
5 .Low operating costs. Optimized design of process parameters is conducive to efficient and stable operation of the bag filter with low resistance, reducing energy consumption, as well as the loss of the bag.

FAQ:                       

What material should I use?
That depends on temperature, particle size, and chemistry. Most of the filter bags we sell are made from polypropylene felt (PO), so start there. For higher temperatures most people go with polyester felt (PE). For more demanding applications we usually end up recommending absolute rated nylon mesh (NMO).
 
Why aren't my bags lasting as long as they used to?
Usually because they are working harder. Bag life is limited by the amount of dirt captured, not by hours in service or gallons processed. Bag filtering clean water may last a year. A bag filtering mud may only last a few minutes. A product can appear clean to the naked eye and still be full of particles that are too small to see.
 
How do I know when to change bags?
Monitor the inlet pressure. The pressure drop across a bag rises as the active surface area is used up. When the pressure starts to raise faster the bag is almost used up and should be changed. Every application is different, but a good rule of thumb is to change bags when you see 8-12 PSI pressure drop (the difference in pressure between the filter's inlet and outlet).

contact: Annchen

Email ID:ec03@zkcorp.com