PIPE BEVELING MACHINE

The ID-Mounted beveling operation use an expandable mandrel which is insert into the open end of the pipe. Tighten draw nut extend the expanding blocks and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the pipe from the end, a bevel is finished which conforms to the bevel angle required. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.

Features

In-Situ cold Beveling improves safety Easy installation & Operation Self-Centering Feed ratchet spanner makes tool feed or back easily Compact design & Light weight Electric/ Pneumatic driven for option Adjust Speed

Application

Oil & Gas filed Power Plant Chemical Plant Nuclear Power Plant Ship Building & Repair

Specification

Drive Options: Pneumatic, Electric Air requirement: 900L-1200L/Min@0.6Mpa Electric requirement: 220-240V 1PH 50/60HZ Feed mode: Feed spanner, manually Packaging: Plywood case

Selection Guide

Model	Clamping Range (ID)		Working Range (OD)		Wall Thickness
	mm		inch	mm	mm
80	28-76		3	88.9	≤15
120	40-110		4	114.3	≤15
252	80-240		10	273.05	≤20

Tool Bits

Standard Supply

Machine 1 cutting tool bit 1 30 degree beveling tool bit 1 37.5 degree beveling tool bit Air/Electric motor Manual Expanding block Wrench Guarantee card