Tapered Roller Bearing, buy 32006 Auto Spares Single Row Tapered Roller Bearing With Low Noise 30 X 55 X 20.75 Mm on China Suppliers Mobile

Product Details

Delivery Time:Stock or 15-30days
Certification:ISO9001:2008

fag spherical roller bearing , High precision regulator part single row 32006 for auto spares parts 30 x 55 x 20.75 mm

Description :

Model	32006
Bearing material	GCr15/AISI52100/100Cr6
IDODW (mm)	30 x 55 x 17 mm
Seal type	double shields
Lead time	Stock or 15-30days
Weight(kg)	0.195
Payment terms	T/T, L/C,Western Union, Paypal
Limiting speed	13000 r/min
Clearance	C2,C0,C3,C4,C5
Viberation Level	V1,V2,V3,V4
Precision Rating	P0,P6,P5,
MOQ	No MOQ
Port	Shanghai
Grease	Mobil polyrex EM,Kyodo Yushi SRL

Advantage of tapered roller bearing
This conical geometry is used as it gives a larger contact patch, which permits greater loads to be carried than with spherical (ball) bearings, while the geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs. When a roller slides rather than rolls, it can generate wear at the roller-to-race interface, i.e. the differences in surface speeds creates a scrubbing action. Wear will degenerate the close tolerances normally held in the bearing and can lead to other problems. Much closer to pure rolling can be achieved in a tapered roller bearing and this avoids rapid wear.

Photos:

Other models

Bearing No	Boundary dimensions (mm)			Weight (kg)
Bearing No	d	D	T	Weight (kg)
32004 Bearing	20	42	15	0.96
32005 Bearing	25	47	15	0.115
32006 Bearing	30	55	17	0.172
32007 Bearing	35	62	18	0.227
32008 Bearing	40	68	19	0.77
32009 Bearing	45	75	20	0.329
32010 Bearing	50	80	20	0.365
32011 Bearing	55	90	23	0.55
32012 Bearing	60	95	23	0.586
32013 Bearing	65	100	23	0.627
32014 Bearing	70	110	25	0.842
32015 Bearing	75	115	25	0.887
32016 Bearing	80	125	29	1.27
32017 Bearing	85	130	29	1.33
32018 Bearing	90	140	32	1.73
32019 Bearing	95	145	32	1.8
32020 Bearing	100	150	32	1.87
32021 Bearing	105	160	35	2.38
32022 Bearing	110	170	38	3.05
32024 Bearing	120	180	38	3.2

Our Main Products

Deep groove ball bearings
Linear ball bearings
Pillow block bearings
Clutch release bearings
Cylindrical roller bearings
Needle roller bearings
Thrust ball bearings
Thrust roller bearings
Spherical roller bearings
Angular contact ball bearings

Advantages
1.high speed and high precision
2.long service lifetime
3.lowest noise and good performance

Payment
1 : T/T: 30% as deposit and 70% balance after get copy of B/L.
2 : L/C (cannot for branded bearings.)
3 : Paypal
4 : Discuss together between buyer and supplier.