Certification:ISO9001:2008

High precision groove ball bearing 10x26x8mm 6000 RS bearings used for bicycle parts​

Description :

Model	6000 RS
Bearing material	GCr15/AISI52100/100Cr6
ID*OD*W (mm)	10x26x8mm
Seal type	open,double seals,double shields
Lead time	Stock or 15-30days
Weight(kg)	0.0088
Basic dynamic load ratings/C	4.8 kN
Basic static load ratings/C0	2 kN
Limiting speed	19000 r/min
Clearance	C2,C0,C3,C4,C5
Viberation Level	V1,V2,V3,V4
Precision Rating	P0,P6,P5,
MOQ	No MOQ
Port	Shanghai
Grease	Mobil polyrex EM,Kyodo Yushi SRL
Payment terms	T/T, L/C,Western Union, Paypal

Deep groove ball bearings, Simple structure, easy to use. Mainly used to bear radial load. When the

radial clearance of bearing is increased,

Deep goove ball bearings has a certain function of angular contact ball bearing that can withstand

the combined radial and axial load.

In high speed cases where thrust ball bearing cannot be used, deep groove ball bearings can be used

to bear pure axial load.

Compared with other types of bearings of the same size, the coefficient of friction of deep groove

ball bearings is small, and the speed limit is high.
However, deep groove ball bearings cannot bear shocks, and are not suitable for bearing heavy loads.

Features:

1.Simple Design, be convenient when use

2. Low Friction coefficient

3. High limit speed

4. Short delivery time

5. Large stock

Payment

1: T/T: 30% as deposit and 70% balance after get copy of B/L.

2: L/C (cannot for branded bearings.)

3: Paypal

4: Discuss together between buyer and supplier.

Products photos:

Type :

Type of deep groove ball bearing:

1. Single row deep groove ball bearing

2. Single row deep groove ball bearing with shield

3. Single row deep groove ball bearing with shield and seal

4. Single row deep groove ball bearing with outer ring with snap groove and snap ring

5. Deep groove ball bearing with filling the gap

6. Double row deep groove ball bearing

Type of deep groove ball bearing depending on the size:

1.miniature deep groove ball bearing:below 26mm

2.Small deep groove ball bearing:range from 28 to 55mm

3.Small and medium-sized deep groove ball bearing:60-115mm

4.Medium and large-sized deep groove ball bearing:120-190mm

5.Large size deep groove ball bearing: 200-430mm

6.Extra large size deep groove ball bearing:above 440mm

Ball bearing model type:

1.Miniature:670 680 690 600 620 630 MR00 MF00

2.General: 6700 6800 6900 16000 6000 6200 6300 6400

3.Inch: RLS00 RMS00 E00 R00 EN00

4.Thickening: 62200 62300 63000 63200 63300 63800

5.Double row: 4200 4300

6.Stainless steel: SS6000 SS6200 SS6300 SS6900 SSR00 SSFR00

7.Non-standard: 60/00 62/00 63/00

Other Models: