Delivery Time:45days after deposit
Certification:ISO9001：2008

automatic electronic powder metering Concrete Mixing Plant / AAC Panel Plant

1. Description

Electronic measuring balance for powder material is a measuring container that weighing before powder material put into pouring.
 
2. Technical parameter

a) Max geometric size:: diameter: φ1760 mm, H≈1598 mm
b) Mass: 670.2 kg
c) Weight: 700 kg
d) Model of loading sensor: “3410” 
e) Pneumatic butterfly valve: D671J-10-300
 

3. Structure

   Measuring balance for electronic powder material consists of cabin, support ring, electronic loading sensor and pneumatic butterfly valve.
   The shape of cylinder likes cone after its top is removed. It has the advantage of falling off material quickly. It is made of steel plate by rolling.
   The supporting ring is made of steel plate. Three electronic loading sensors are hanged between back rest of cabin body and supporting ring. Cylinder body for material falling off is equipped with pneumatic butterfly valve and control program for material falling off.

4. Principle of work

When put powder material into cylinder, the weight of powder material will transmit to weighing display, i.e. the put weight of powder material and material falling off will be controlled by pneumatic butterfly (connect the output signal of the display to the computer that can antomatic control the material putting).

5. Maintenance

a) Each shift finishes its production, turn off power supply, clean the wall of cylinder and assure that the weighing of powder is correct.
b) Clean and wipe dust on electronic sensor and weighing display.
 
 

6. Matters for attention

a) To operate weighing display (weighing display controller) must be carried out strictly in accordance with specification.
b) It is strictly prohibited that have other current get through electronic sensor (e.g. the current of the electric welding) lest should demaged.
c) Don’t install weighing display (weighing display controller) at the place where sunshine can shine directly and need to avoid temperature change suddenly and vibration.
d) When delivery the weighing has debugged correctly. Don’t change it optionally at site 
7. Safety

When put material in it, it is prohibited strictly to stand people at periphery.