Product Details

Delivery Time:3-5 days
Certification:CE,FCC,MSDS

Product brief
This product is general type microemulsion cutting fluid,consist of lubricating oil,EP anti-wear agent, anti-rust agent and other additives. Suitable for processing cast iron, carbon steel, alloy steel, copper alloy, aluminum alloy, etc.and is widely used in all kinds of machine tools, machining center of cutting, grinding process. Liquid supply for single machine and concentrated supply for central cooling system

Product features:
1,General type cutting fluid,wide range of application
2,Microemulsive cutting fluid,excellent lubrication and cooling performance,water liquid treatment is easy
3,Excellent lubrication,cooling,cleaning and anti-rust performace
4,Products can improve the surface finish of workpiece, ensure the workpiece and machine tool online antirust requirements
5, Good corrosion resistance, foam inhibiting and emulsion stability of long service life, reduce maintenance costs

Technical parameters

Item	Quality index	Test method
15~35℃ Original solution appearance	Red brown oil liquid	GB/T6144 5.2
Diluent(5%)	Phase state	Clear to microemulsion	Visual
pH	9.0～10.0	GB/T 6144 5.5
Stability (15~35℃, 24h)	Soap	no	SH/T0365 appendixA
Oil	no
(15~35℃, 4h) Salt allowance	No phase separation	SH/T0365 appendixC
mL/10min Defoaming ability	≤2	GB/T6144 5.6
55±2℃ Corrosion test,full immersion	First grade grey casting iron	24h	GB/T6144 5.8
Aluminum	8h
Red copper	8h
H62, Brass	8h
35±2℃ Anti-rust test	First grade grey casting iron	Single piece	24h	GB/T6144 5.9
Lamination	8h

Instructions:
1,Recommended concentration:cutting:1:10~1:20; grinding: 1:20~1:25,Use concentration can be adjusted according to processing requirements
2,Use (change)of new fluid method: before using the new liquid,clean the storage tank and piping circulation(with concentration diluent and adding bactericide 0.3 ~ 0.5%),at last add the productt evenly circulation can be used
3,Tank liquid supply or maintenance: when need supply tank need supply,should add water with corresponding percentage of original solution

Attention:
1,Machine tool should be complete filter, slag system, timely removal of scrap metal, oil slick and other impurities, if not many days to start the machine tool,if machine downtime for a long time,should air circulation and oxygen filling tank at least 2h/day.
2,Central fluid feeding and central cooling system,should be detailed operational procedures,that person is responsible for operation.maintenance and management.
3,Mixed with other brand cutting fluid is prohibited
4,This product should be stored in a dry, cool and ventilated inside storeroom, leakage should be avoided in the sun, rain, 5 ~ 35 ℃ storage temperature.If improper storage cause the product status changes, restore specified storage temperature after mixing, and then dilute liquid, does not affect the processing performance, can be used normally.

Other matters:
1,Package:25kg/plastic drum,200kg/plastic drum,1000kg/plastic drum
2,Shelf life:two years